» Site Navigation
0 members and 889 guests
No Members online
Most users ever online was 47,180, 07-16-2025 at 05:30 PM.
» Today's Birthdays
» Stats
Members: 75,945
Threads: 249,140
Posts: 2,572,332
Top Poster: JLC (31,651)
|
-
SPAMTASTICO!
-
-
Hi and welcome, I suggest looking over this caresheet:
http://ball-pythons.net/forums/showt...ius)-Caresheet
As you read through threads on here you'll find that a heat light is not the most ideal heat source for a snake. Also, reading temps with your hand that runs about 98.6 degrees at any given time is also not suggested. 100 degrees will not feel hot to your hand, but is far too hot for a snake. I suggest getting a UTH (under tank heater, or heat mat) and a thermostat. Since you are short on money I will post links to a few cheaper options.
First is a digital thermometer/hygrometer. This one can be found online or at Home Depot/Lowes or even Walmart. It's cheap and accurate. You place the unit on the cool side, the probe on the hot side, and it reads both temps as well as humidity all in one unit.
http://www.amazon.com/Chaney-Instrum...8162503&sr=8-6
Second is a UTH. They carry them at most pet stores, usually ZooMed or Zilla or the sorts. Make sure it's one for a 10 gallon tank, and only covers 1/3 to 1/2 of the bottom of the tank.
Third is a cheap thermostat. It's $26 shipped from Amazon.com. I've had some good success for such a cheap thermostat, and think it would work best for your situation.
http://www.amazon.com/Hydrofarm-MTPR...8162613&sr=8-1
I stress the thermostat (not thermometer) because UTHs get VERY hot, and can burn your snake since they usually favor the hot spot.
The scratching her head could be either mites, or if she's going to shed they will do that sometime. I'd be sure to check her thoroughly for little black specks, can be found in the water, if she's soaking a lot that can also be a sign. Check around the her heat pits and eyes. IF she has mites, I suggest PAM (Provent a Mite), nothing works better than this product.
http://www.pro-products.com/index.ph...d=53&Itemid=59
Keep a very close eye on the yawning. If she's doing it a lot I believe that can be a sign of a respiratory infection. Check for bubbles coming from the nose, mucus coming from the mouth, "drooling" and other signs like that. I hope this helps! I know your kind of strapped for cash, but these are necessities for these animals if you want her to be healthy and "happy" (as happy as a snake can be?).
Again, welcome to the site
2.0 Offspring, 1.1 Normal Ball Python, 1.0 Pastel Ball Python, 0.1 Albino Ball Python, 0.1 Pinstripe Ball Python, 0.1 Banana Ball Python, 1.0 Pied Ball Python, 1.0 Normal Hognose, 0.1 Veiled Chameleon, 0.0.1 G.pulchra, 0.1 P.metallica, 0.1 M.giganteus
-
The Following User Says Thank You to Skittles1101 For This Useful Post:
PitOnTheProwl (06-15-2011)
-
^ What she said.
-
The Following User Says Thank You to Crazy4Herps For This Useful Post:
Skittles1101 (06-15-2011)
-
Registered User
It definitely sounds like you have some temp and humidity problems. Follow the above advice to get on the right track. Your snake will probably start to eat once everything is corrected. Snakes are NOT cheap to set up, but they are pretty darn cheap once you have everything. If you can't afford to set up the snake properly, maybe try and cash in on some early b-day presents from other people to get the supplies you need or find someone who can afford to keep it properly.
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|