» Site Navigation
0 members and 671 guests
No Members online
Most users ever online was 47,180, 07-16-2025 at 05:30 PM.
» Today's Birthdays
» Stats
Members: 75,904
Threads: 249,100
Posts: 2,572,078
Top Poster: JLC (31,651)
|
-
-
-
Re: Plastic boxes as a cage
Most people use 32qt tubs for adult males, 41 qt for adult females.
6 qt for babies then u can use 28 qt if u want. Me personally i keep my males in 28 Qt's for now. Works fine
UTH (flexwatt is better imo) on a thermostat.
No light needed if ur room temp is around 76 or so because the tub adds a few degrees warmer typically.
Last edited by BuckeyeBalls; 03-28-2011 at 05:20 AM.
Mike
-
The Following User Says Thank You to BuckeyeBalls For This Useful Post:
PitOnTheProwl (03-28-2011)
-
Mike got all but one.
I do believe that behaviour is different in an enclosure than tub. I have multiple enclosures and tubs and every now and again trade a snake from tub to enclosure. I start keeping note of what I see after a month or so, it gives the animal time to find a rythem. I have found that most in an tub gain weigh faster but also are a lot less active. I'll look in through the end of the tub and see that the snake is in a hide much of the time. The enclosure snakes seem to spend time moving around in the nights my big female who has done this lots will lay curled so much in her tub that she gets bent scales in the enclosure after a shed or two they go away. I can't say for sure but it seems to me they show more curiosity with all things in the enclosure also seem less timid as well. I use both and am happy with both and have complaints with both. This is just my observations of the same animals in an enclosure and tub.
-
The Following 3 Users Say Thank You to kitedemon For This Useful Post:
Blubb (03-28-2011),PitOnTheProwl (03-28-2011),Steve-J (09-06-2011)
-
Registered User
Re: Plastic boxes as a cage
I'll also add that You don't Always have to trade up tubs, I've kept BP's less than a month old in 41 qt CB70's, each with Privacy, Clutter, and 6 hides and I rarely ever get a refusal when it's feeding time. Now I know others have but the simple solution is if the big tub doesn't work you can always trade down.
But yes if your going to have alot of BP's I have to say tubs are the way to go. they are naturally a very private animal.
"Be Excellent to each other, And Party on Dudes."
Pets
1.2 Cats (Hyuga, Luna, Saki)
0.1 Woma Python
1.1 Cinnamon, 0.1 Pastel "Opera",1.0 Pinstripe, 1.0 Spider "Carcillo"
0.0.1 Striped California Kingsnake "Ceaser" 0.0.1 Apricot Pueblan Milksnake "Bullet"
0.0.2 Crested Geckos 0.0.2 Gargoyle Geckos
-
-
Re: Plastic boxes as a cage
 Originally Posted by Seru1
I'll also add that You don't Always have to trade up tubs, I've kept BP's less than a month old in 41 qt CB70's, each with Privacy, Clutter, and 6 hides and I rarely ever get a refusal when it's feeding time. Now I know others have but the simple solution is if the big tub doesn't work you can always trade down.
But yes if your going to have alot of BP's I have to say tubs are the way to go. they are naturally a very private animal.
Iv kept hatchlings in a 28 qt tub just fine. Same as u. Added more hides, and a few extra things.
Its obviously more complicated because its more things to remove and clean, but if you dont have a 6qt hacking rack but open spaces in a 28 qt rack u do what u gotta do
-
-
BPnet Veteran
Thanks for all the answers guys ! Really helpful.
I found a pretty large plastic tub in my garage. I don't know how many gt it is, so I measured it. It is 83 centimeters long, 18 centimeters high and 46 centimeters deep. As you can see, I'm not from the states so I use centimeters. I don't know if it is too big for a 6 months - 1 year old ball python. I will of course add several hides, waterbowl and some plants. What do you think?
I also thought about the ventilation. Where and how many holes in the tub should there be? My room is quite warm because of the snake cages.
I really appreciate all answers, it really helps.
-
-
Re: Plastic boxes as a cage
I usually recommend less holes if you need to increase humidity and more holes if you have too much humidity.
If your not sure start out with 4, 2 on each side. That will provide enough air, you can always add more if humidity is too high.
-
The Following User Says Thank You to West Coast Jungle For This Useful Post:
-
Re: Plastic boxes as a cage
Plastic tubs are great!! I'm switching over to them now, and it makes it so much easier to maintain the correct temps and humidity. An UTH (or flexwatt) works well as long as you have a thermostat, and no, ball pythons don't need any supplemental lighting.
Let's see, 83x46x18cm roughly comes out to 32x18x7 inches, so that would be a perfect size. It might be a little too large for a 6 month - 1 year old, but yeah, as long as you put some fake plants and 2 nice secure hides in there he should be fine, and then he can grow into it as well 
As far as the number of holes, it does depend on how dry your area is, as was already mentioned. Just try it out by putting whatever bedding you're going to be using in there and start making holes and see what gives you the best humidity. I put my holes in the sides of the tubs and I've been drilling them (1/8 inch or 0.31 cm bit), but I know some people solder them instead.
~ Erin ~
somewhat damaged
0.1 normal ball "Karma"
1.0 albino ball "Reznor"
1.0 brazilian rainbow boa "Helix"
1.1 corns - bloodred "Jambi", creamsicle okeetee "Aurora"
1.0 striped california king "Nix"
0.1 yellow tiger crested gecko "Ember"
-
-
BPnet Veteran
Re: Plastic boxes as a cage
 Originally Posted by blushingball419
Plastic tubs are great!! I'm switching over to them now, and it makes it so much easier to maintain the correct temps and humidity. An UTH (or flexwatt) works well as long as you have a thermostat, and no, ball pythons don't need any supplemental lighting.
Let's see, 83x46x18cm roughly comes out to 32x18x7 inches, so that would be a perfect size. It might be a little too large for a 6 month - 1 year old, but yeah, as long as you put some fake plants and 2 nice secure hides in there he should be fine, and then he can grow into it as well
As far as the number of holes, it does depend on how dry your area is, as was already mentioned. Just try it out by putting whatever bedding you're going to be using in there and start making holes and see what gives you the best humidity. I put my holes in the sides of the tubs and I've been drilling them (1/8 inch or 0.31 cm bit), but I know some people solder them instead.
Thank you so much for your answer. I will immediately start off making a good tub for my future ball python. It is always so exciting with new snakes
-
-
BPnet Veteran
Another thing to note about the behavior:
I used to think that more space to roam was a good thing, but a few older keepers pointed out that the more unsuitable a space is, the more roaming a BP will be. This doesn't mean that roaming and exploring is bad, but it CAN be a sign of stress. I think anthropomorphizing the snakes can be a problem. While animals do explore and get curious about new things, sometimes roaming may be a sign they aren't comfortable. For instance, many older dogs get restless if they have arthritis because laying down for too long hurts. It may be good that they are active and moving, but not if they can't sleep well.
No one can say what is going on in their snake's head, but it is something to think about! I think whatever works best for both owner and snake, (as long as the animals are safe and healthy) is the best option!
1.0 Het Piebald (Lycaeus)
1.0 Spider (V "Fawkes")
0.1 Piebald (Fia)
0.2 Pastel (Chalcomede & Daeneyrs "Dany")
0.1 orangebelly (Secha "Veruca Salt")
R.I.P my babies
Texas luecistic ratsnake (Ripley) 0.1
Ball Python (Ariadne) 0.1
Ball Python (Montreal) 1.0
-
The Following User Says Thank You to darkbloodwyvern For This Useful Post:
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|