Quote Originally Posted by DirtyJoker View Post
For overall temps and humidity I use Fluker's Digital Display Thermo-Hygrometer.
http://www.strictlypetsupplies.com/_...rmo-Hygrometer

And for the hot side with the UTH heating pad, I use the Zilla Digital Thermometer.
http://www.strictlypetsupplies.com/_...al-Thermometer

And to monitor the temp on the hot side I use the Zoo Med Reptitemp 500R Thermometer Sensor.
http://www.bigalsonline.com/StoreCat...its=12&offset=

Another question I had was with the probes, I taped them down to the glass on the hot side.
There pretty much next to each other, is that ok?

Now for the bedding I use Aspen, should it be pretty loose over the probes for better temp readings?
As much as a pain that it is to have the probe move around - tape inside an enclosure with your snake, especially tape on a warm surface that gums up from the heat and pulls up and then gets stuck to your snake is not a good thing at all. I'd remove the tape from inside enclosure.

Everything else looks good!

Also, my probes for my warm sides are on top of the substrate inside the warm side hide, measuring the temps where the snake is actually laying.