I'm almost 100% this is wrong.

[abuja]

According to the sheet on ball-pythons.net, the temps should be: hot side-88-90, cool side-78-80. Your temps are too low right now.

[2kdime]

Describe its setup to me. What are the ambient temps at? Cool side?

NEVER heat a Blood up to ANYTHING over 90 degrees.

My hot spots are at 86, my babies are at an ambient temp of 81 to 82 with NO hot spot, 1 hide, and a water dish, and they're eating machines. They don't like it hot that's for sure!

Goes to show you what LLL knows about they're snakes

[PythonBreeder]

Describe its setup to me.

NEVER heat a Blood up to ANYTHING over 90 degrees.

My hot spots are at 86, my babies are at an ambient temp of 81 to 82 with NO hot spot, 1 hide, and a water dish.

Goes to show you what LLL knows about they're snakes

SEE! Also if I recall correctly, you are the one who helped me out with my setup. And you told me that same thing and I said okay well no hot spot and low 80's. But now I'm being told different. UGHH!

[2kdime]

Listen to me, not LLL. I'm no expert, but if you heat your Blood up to even 85, I doubt they'll even feed. And if they did, and were exposed to a hot spot of the mid 90's, you'd get a regurgitation.

Can we run through the setup again? Or maybe a picture?

SEE! Also if I recall correctly, you are the one who helped me out with my setup. And you told me that same thing and I said okay well no hot spot and low 80's. But now I'm being told different. UGHH!

[Jyson]

I agree with 2kdime, LLL is wrong. Here is an episode of Reptile Radio, where Kara Glasgow talks about Blood Python Husbandry, etc. You can definitely trust Kara, she knows her stuff when it comes to Bloods. And this cleared up alot of confusion that I had too at first.
http://www.blogtalkradio.com/reptile...-Blood-Pythons

[Jason Bowden]

I wouldn't go much higher than 90 degrees on the hot spot. Keep the humidity high.
You may try the filling your enclosure with crumpled paper and adding several feeder rodents of the correct size. I had this work on a couple of noneating ball pythons of mine.
I don't know about your setup,but, I'm sure that blood pythons would prefer a smallish enclosure as babies/juvies. If it is really small, maybe just a ten gallon aquarium.
It makes me sick to hear that the first one arrived dead. I received a very sick snake before that later died. It was from a big reptile store also. I'd recomend every one to stick with reputable breeders.

[2kdime]

I wouldn't even give it a hot spot at this point. Babies sometimes seem to be freaked out by hot spots which can be one more stresser.

Best setup is just an ambient of 81 or 82, a small hide, water bowl, and that's it. Humidity not TOO high, 60 to 70% should suffice.

Since you've got him in a tank, can you cover 3 sides of the tank with paper to really darken that cage up?

What are your ambient temps?

Ever had him to the vet for a fecal?

How old is the snake and how long off feed?