» Site Navigation
1 members and 656 guests
Most users ever online was 47,180, 07-16-2025 at 05:30 PM.
» Today's Birthdays
» Stats
Members: 75,905
Threads: 249,101
Posts: 2,572,083
Top Poster: JLC (31,651)
|
-
Registered User
Possible Thermostat Malfunction?
I have a an 18x18x18 exo terra setup with an 8x8 UTH under the hide. I simply placed spacers on the bottom of the UTH to let it set off of the stand instead of adhereing it directly to the tank. I plugged the UTH in through a Zoo Med Repti-Temp Rheostat in order to adjust the temp and placed a thermometer probe using the suction cup right above the UTH. The problem is even with the Rheostat adjusted to its lowest possible setting the tempature continues to rise into the 102 degree range. Could the rheostat not be working properly or should a move the probe inside the tank underneath the hide. The ambient temp is staying between 80 and 85 degrees. I really don't want the belly of my ball burned. So I was thinking of just unplugging the UTH until I get back to the store tommorrow. As long as the ambient temp stays around 80 he will be fine right?
-
-
Re: Possible Thermostat Malfunction?
Hi,
Is the thermostat probe sitting right on the UTH?
Possibly taping it down tight might help - and have you double checked the thermostat by turning it the other way? (preferrably with no animal in the tank just in case ).
If the 500R a dimmer type or an on/off type - I can't remember at the moment.
dr del
Derek
7 adult Royals (2.5), 1.0 COS Pastel, 1.0 Enchi, 1.1 Lesser platty Royal python, 1.1 Black pastel Royal python, 0.1 Blue eyed leucistic ( Super lesser), 0.1 Piebald Royal python, 1.0 Sinaloan milk snake 1.0 crested gecko and 1 bad case of ETS. no wife, no surprise.
-
-
Registered User
Re: Possible Thermostat Malfunction?
Yeah it's suctioned right above the UTH on the bottom of the glass. I was afraid to turn it up on high because it seems like no matter where I set the dial it functions at full blast. A family member who raises snakes suggested placing the probe on the inside of the tank under the hide for a more accurate reading. He stated that it's probably 10 degees cooler inside. I have about 2 inches of aspen bedding down so I hope that between that and the glass a lot of the heat is absorbed before reaching Diablo.
-
-
BPnet Veteran
Re: Possible Thermostat Malfunction?
 Originally Posted by dr del
Hi,
Is the thermostat probe sitting right on the UTH?
Possibly taping it down tight might help - and have you double checked the thermostat by turning it the other way? (preferrably with no animal in the tank just in case ).
If the 500R a dimmer type or an on/off type - I can't remember at the moment.
dr del
He's using the rheostat, not the 500r thermostat.
I've heard that those are terrible in terms or fine control of heating devices. Pick up a Lutron 300W lamp dimmer at Lowes ($10) and it will allow for much better control as it's a slider and not a notched wheel.
-
-
Re: Possible Thermostat Malfunction?
Yeah, I have heard those rheostats don't work well. I would invest in a reptitemp 500r. I have never had problems with mine when I used it.
-
-
Registered User
Re: Possible Thermostat Malfunction?
Thanks yall! I figured the stat just wasnt as percise as it needed to be. I placed the thermo probe inside the tank under the hide last night and was glad to see temps were staying around 87 and 88. I appreciate those of you who commented. Maybe one day I will be able to pay it forward.
-
-
Re: Possible Thermostat Malfunction?
Hi,
You really don't want the thermostat probe inside the enclosure if you can avoid it though - it just means the snake can mess with it. 
dr del
Derek
7 adult Royals (2.5), 1.0 COS Pastel, 1.0 Enchi, 1.1 Lesser platty Royal python, 1.1 Black pastel Royal python, 0.1 Blue eyed leucistic ( Super lesser), 0.1 Piebald Royal python, 1.0 Sinaloan milk snake 1.0 crested gecko and 1 bad case of ETS. no wife, no surprise.
-
-
Re: Possible Thermostat Malfunction?
Or pee on it or move it. And this causes the thermostat to run the UTH on full blast.
Get it out of the enclosure.
-
-
Registered User
Re: Possible Thermostat Malfunction?
I didn't know keeping the humidity and temp correct was going to be this difficult. I bought Diablo from a reptile show and the guy told me owning a snake was far easier than owning any other pet. I guess he was a real good salesman right? If I can just get him through without getting sick, I am going to build him a new dwelling next week. I believe from everything I've read on this site that glass enclosures are more difficult to regulate. I appreciate all of your input and suggestions. It's nice to see a forum where people don't make you feel like a total idiot.
-
-
Registered User
Re: Possible Thermostat Malfunction?
Anyone have a link to a single tub setup? He needs a larger enclosure than what he is housed in (another obvious point Mr. Salesman didn't bother to tell me). Don't know his weight, but he is approximatley 3.5 foot long. He is currently in an 18x18x18 Terra with only one hide. From what I've read he needs double the space I'm providing him. I believe setting up a tub enclosure would be the fastest and most effeciant way to keep him healthy.
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|