from experience if your gonna stain it, don't i repeat don't use screws

do you have a small air compressor and a finishing nail gun?? if so use 1 1/4" finishing nails. set your gun with the proper psi and the right counter sink and it will come out amazing. You will be thanking me later for not using screws. and for glue get titebond type II and use clamps as many as you can get your hands on for 90% angles go out and buy 2 pairs of 90% clamps. they are really cheap at harbor freight. like i got mine for 2 bucks a pop then like i said borrow buy or whatever you gonna do get as many clamps you can get. i have 2 36" clamps and 4 48" clamps when i get them money im gonna buy me some small ones too cause them big things get in the way sometimes.


well just giving you my thoughts and etc....

keep me updated on you build. wish i could help ya cause i love building stuff ... but i got my work cut out for me right now. im almost done building a box for 4 2500watt a piece subwoofers so this box is 48.5"long x 35" deep x 23.25" height. this guys is gonna be pushing 10000watts that is 10K that is outrages plus hes giving me the hole install the whole works. i gotta dynamat the roof, floor, all 4 doors, rear qt panels, rear hatch. run 2 alternators wire 4 battery's and it has to be all be down in 4 weeks for the first sound comp down here in tx. if your in to car audio he should hit about 150 easy we are shooting for 155 tho. haha my little infiniti q45t hits 140's. well OK 138.5 im gonna dynamat some more of the rear of the car and i hope it raises the the dB at least 2dB

wowo i got really off track

its cool im having funny just sitting here tweaking from my meds