I have issues with humidity, like it goes down to 20% 2 hours after misting. So I got a reptifogger, didn't get the mistking like I wanted due to the price( but with the time, work, and money I've put into this, I should have) my first problem was that the fog comes out of one tube and just soaks the area its above, so that didn't work. I got some pvc and set it up so it would come out of 2 places, but that just soaked 2 places. Then I had to get a timer because running it all the time will soak everything and break the machine. The timer I got had a minimum of 30min increments of on/off time. That was too long. Now I have smaller chemical free, drinking water safe cpvc pipes cut and fitted to the top on the tank, I drilled small holes along the pipes so that the fog is evenly distributed around the tank and I got a better timer that I can set to as low as 1min every 3 hours (right now i have it at 15min every 3 hours) now my only issue is that the fog creates water droplets on the inside of the pipes and they block some of the holes. Does anyone know of a way to keep this from happening?

Sent from my SM-S767VL using Tapatalk