So I finally got my tank set up and I think everything is good.

I had to tear it down and redo some of the thermometers and probe placement but here are a few pics. I don't have the snake yet, I'm going to an expo tomorrow to purchase it.

As for the temps, the ambient air thermometer that is on the substrate on the cold side is reading 82 now but it goes down and up ranging from 80-81 usually. The thermometer that has the probe on top of the heat mat under the substrate is reading 91, and the thermostat controlling the heat mat has the temp set to 96 to achieve the 91 reading of the probe idk if that's normal but it's working.

As for humidity that's what I'm worried most about because it seems to flucuate a good amount all day, now it's saying 48 on one and. 54 on the other gauge, but it's usually right around 60 I've seen it go as high as 68 but it usually drops down within an hour or two.

As for the ambient air heater I have a CHE 100W bulb placed right in the middle on top of the tank and that's working good. I have it on a dimmer and it's at about 80% power that's giving me the correct temps.

Any and all opinions are appreciated!

Sent from my SM-G930T using Tapatalk