So last few weeks I've been in the process of creating a new enclosure for my GTP. Just thought I would share. I used a 18x18x24 Exo Terra I got off Craigslist for $20.
Started by using Right Stuff spray foam for background and sides. One side a day. Also I silicone three rod holders to the sides before I sprayed on the foam. I did the sides just to give him a little more security since he's still a juvenile.
Once that was completed I applied and rubbed in black silicone until one side was completely covered. Then I added Eco Earth and let that set for 24 hrs. I did this for all three sides. One side a day.
This part completed
Next I replaced the screen top with a piece of 1/4" HDPE board I ordered from Grainger. Then took it to Lowes and had them cut it to the size I needed 17"x17".
Then attached a Pro-Products heat panel.
Made some perches using flexible 1/4" pvc and coated them with black silicone and rolled them in Eco Earth. They wouldn't scorch so I did this instead. Guess only the bigger pvc will scorch.
Added some LED Tape for lighting and on a dimmer. It's set at low in the 1st pic and high on next pic.
Some cypress for the bottom, fake plants on sides and live potted plants on bottom.
Still not done. I'm waiting on my Herpstat 1 and even though its been nearly two weeks since the silicone application, I'm gonna let it sit for another couple weeks just to make sure everything is cured before adding the GTP. Any comments,concerns or ideas are appreciated. This is the first time I've done anything like this. Also the silicone was labeled for aquarium use. I special ordered it.
Reply With Quote