New DIY hatchling rack

[Blue Apple Herps]

Thought I'd share my new hatchling racks I made. They're made from laminate shelving material and hard board. Each one holds 20 tubs (though I made a measurement error and the bottom slots of every rack is 1/8 too short!!) So mine actually hold 18 tubs each. Tubs are ziploc storage containers.

I chose the black laminate shelving as I wanted it to match the black PVC racks I already had in the room, but I didn't want to mess with sealing and painting wood. However, the material chips VERY easily and the slightest ding exposes the underneath part. I'll probably try to go over everything with a sharpie as a ghetto fix.

I like this size for hatchling bps much much more than the standard 12 qt tubs that a lot of prefabricated racks use. I find those are often too large for hatchling bps and I had lots of trouble with nonfeeders. With the storage containers, they're large enough for the bp to move around and live there for a couple of months, but small enough that they feel more secure.

Total cost for all 3 was ~$260 including all building materials, tubs, heat, hides, and water bowls. Pretty cost effective considering that's just about $4/tub.

Anyways, I didn't do a write up, but its a simple design. Feel free to ask any questions if you have any.

All 3 racks. For additional strength, I used a router to dado all of the shelving joints. This way it exposed the laminate and I could use glue in addition the screws to hold it all together.:



Close up of tub; I did shelving by cutting slots for the hardboard. This way no hardware is required to hold shelves in place, making it simpler.



Here you can seed tub with hide and water bowl. The hide takes up the back half of the tub. But there's plenty of room for the snake to crawl over the hide. About half use the hide, and half just wedge themselves between the tub and the hide, makes them feel nice and secure!



Here's a 10 day old hatchling for size comparison to entire tub.