How I set up my BP's enclosure
SO i fugured I would show some images of what i did for setting up my enclosure for my BP. Maybe some of you would like to do the same thing.
First I installed the Under Tank Heater and secured it with tape.
Then I put a thermostat sensor between the heater and a piece of insulation. I used insulation to make sure the heat goes up into the tank and does travel mostly downward to the selve i have it sitting on.
From the top it looks like this.
Next I put black foam board around the outside of the tank to help make my BP feel more secure, and I mounted the thermostat to the outside.
And finally I put a thermometer and humidity sensor inside the tank. The one I used has a wire that can run along the bottom of the tank to read the temp on the hot side and the cool side and the humidity in the tank. And I started using ecoearth substrate. I seems to work really good for getting good humidity.
And thats it. If you have and questions comments or concerns let me know.
Reply With Quote