This is my basic plans for the cage im going to build. Unlike most cages this one is designed to be disassembled for transportation and then reassembled in probably about 5mins.

Reason I designed it this way it well I will be moving a lot in the next few years.

I have designed 2 version one for my Bearded Dragons then modified it for my BP. I will describe the Bearded Dragon version just because its the bigger and original design that can be modified.

Basic plan is to use flexwatt heat tape covered with linoleum on the inside of the cage, to serve as an insulator and make cage easier to clean. The bottom base will have substrate damns so when removed from the rest of the cage it will still hold the substrate. The back will be held in place by wooden dowels or metal poles. The side plexiglass slide into grooves cut in the back and base. and the front plexiglass is sliding doors.

Kind of hard to explain everything so if you have questions let me know.

I used Google Sketchup to create this model its free if you want to download it and take a look at the 3D model its easier to see. If i posted pictures it would take forever to view every part. Each part is created in 3D along with the finished result.

I used mediafire to upload a rar file with a folder and all the parts.

http://www.mediafire.com/file/ymikz4t1miw/CagePlans.rar

I am no carpenter, i pulled these plans right out of my head so let me know what you think and what could be improved.