» Site Navigation
0 members and 706 guests
No Members online
Most users ever online was 47,180, 07-16-2025 at 05:30 PM.
» Today's Birthdays
» Stats
Members: 75,909
Threads: 249,108
Posts: 2,572,140
Top Poster: JLC (31,651)
|
-
Help! Too high humidity!
As some of you may have read in my last post, I just moved my girl to a 41 quart bin, mostly because her old cage was at a constant 40% humidity, and she's in shed, so I was really panicking. But I really like the bin. Holds heat well, too.
Now there is a problem. When I first put her in, I sprayed the bin so it was up to 70%. BIG mistake!! It kept going up and up into the 80%s, and then my digital thermometer/hygrometer said "HI", meaning it is above 89%. I will clean it out soon to make sure there was no mold growth or anything, but is this in any way harmful to her? I air it out every few hours or so until its down to 75%, but it shoots back up when I close it. I have two breathing holes on each side. As soon as she finishes this shed, I'm going to drill two more holes on the long sides.
Can too much humidity be harmful while a snake is in shed? Seriously, its bad in there. The sides of the bin are all foggy.
And I will NOT get a dehumidifyer! It is 35% in my house right now, which is bad enough.
-
-
Re: Help! Too high humidity!
-
-
Re: Help! Too high humidity!
too much humidity can increase the risk of RI, but I think that's over a long period of time rather than just a day or two of high humidity. Good luck on airing out the tub a bit more!
-
-
BPnet Veteran
Re: Help! Too high humidity!
 Originally Posted by mainbutter
too much humidity can increase the risk of RI, but I think that's over a long period of time rather than just a day or two of high humidity. Good luck on airing out the tub a bit more!
High humidity runs the risk of bacteria and mold of growing, i dont think you have to worry about RI. However mold/bacteria + stressed out snake, lower temps can usually help catch an RI. But if its just a day or two of high humidity you dont have anything to worry about. Maybe put a smaller water dish in there, or solder more holes in that tub. Good luck.
-
-
Registered User
Re: Help! Too high humidity!
I would put a few more holes in your tub. You are lacking holes for sure.
-
-
BPnet Veteran
Re: Help! Too high humidity!
actually now that i look at those pics again, i think its just the huge water dish, put in a smaller one , just big enough for the snake to take a drink and you should see the humidity where you want it. The holes you have are big enough to make me think that ventalation is not the problem.
-
-
Registered User
Re: Help! Too high humidity!
If you make sure its clean, there is nuthin to worry about...They can tolerate high humidity pretty well....
-
The Following User Says Thank You to RuGGeR For This Useful Post:
-
Registered User
Re: Help! Too high humidity!
I would want more holes in it. I use 5 millimeter drillbits on my tubs and I got alot of holes. A single line on the long sides and two lines on the short sides, this gets me to around 60% at all times.
-
-
BPnet Veteran
Re: Help! Too high humidity!
If more holes don't work (they didn't work for me) try this method:
http://www.ball-pythons.net/forums/s...ad.php?t=76491
-
-
Re: Help! Too high humidity!
Thank you so much, everybody!
As soon as she finishes getting her shed off (tonight, I'd guess, she started last night and quit, lazy girl), I'll go back to handling her daily and I'll leave it open while I handle her. I'll also drill more holes.
juddb:
Actually, she is fairly large, 3'10", and her normal water bowl that she can fit in was too wide for this cage. I happened to have this smaller one on hand, and I will use it until I find a larger one. I like giving her room to soak because if I'm gone for a few days or something, I don't have to worry about her having a bad shed.
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|