Radiant heat panels UP's and Down's

[drugaria]

I'm looking to heat my new 432 vision cage with a radiant heat panel or another good alternative heater so could you share your experiances with these type of heaters. Also advise on the size and wattage. Size of cage is 54" l x 36" D x 18" h

[dsirkle]

I have a few of these. They work great and will easily keep up with winter room temperatures. The down side is that they cost much more to purchase and to operate than flexwatt or a uth. I have 2 by Pro Products and 1 by Reptile Basics. The Pro Products work great but I think that the better thought out design of the Reptile Basics is nicer. www.reptilebasics.com also has an FAQ page for their radiant heat panels which tell you what size that you need for your particular application.

[Skiploder]

I'm looking to heat my new 432 vision cage with a radiant heat panel or another good alternative heater so could you share your experiances with these type of heaters. Also advise on the size and wattage. Size of cage is 54" l x 36" D x 18" h

I run them in all my cages. I also have a V432.

Size and wattage depends on the species you are keeping and the ambient temperature of the room the animal is in. Call Bob Pound at Pro-Products who will ask you these questions and give you the proper advice.

[starmom]

I have three RHP's made by Rich at Reptile Basics and they are great!!
While the initial cost is greater than the cost of flex watt, I have not seen them being more expensive to run; they turn off and on as needed to maintain the temps set by the t-stat.
I actually like them much better than flex watt....

[chetman7]

I'm thinking about picking up a rbi cage with a 40 watt RHP. I'm not entirely sure how to set these things up....when using a RHP does that mean I no longer need a UTH... and in winter will this keep the correct temps for both the hot and cool side??? my room gets real cold..prob around 74 F.
Where would u put the thermostat probe???

[Skiploder]

I'm thinking about picking up a rbi cage with a 40 watt RHP. I'm not entirely sure how to set these things up....when using a RHP does that mean I no longer need a UTH... and in winter will this keep the correct temps for both the hot and cool side??? my room gets real cold..prob around 74 F.
Where would u put the thermostat probe???

If it's a 4' cage with normal ventilation, in a 74 degree room and not sitting on a bare floor, the 40 watt panel will heat your hot spot to your desired temp and probably raise the ambient in the far end of the cage 4 to 6 degrees.

Again, it depends on what you set your hot spot to. The higher the hot spot, the higher the cool end of the cage.

As for the probe, I put it under the panel on the floor of the cage. I drill a small hole in the bottom and pop the probe up so I can get an accurate hot spot reading where the snake will be.

I wish someone could find a way to make a RHP for a rack..........

[Krazy99CL]

I run them in all my cages. I also have a V432.

Size and wattage depends on the species you are keeping and the ambient temperature of the room the animal is in. Call Bob Pound at Pro-Products who will ask you these questions and give you the proper advice.

Agreed.

Theres a lot of things that will determine what fits your application. I recommend talking to Bob at pro-products. He recommended a 55w for my 421d boaphile. My temps are identical as yours although animal requirements and where/room(ie upstairs,downstairs; carpet or tiled room) the cage also needs to be known to once again determine how many watts and size.
Again, dont guess ask someone who really knows or a professional of course.
Bob from pro-products will ask you a lot of questions to make sure he provides you the best size and watt for your application.
Not sure about Rich at RBI, but im sure he knows aswell, just havent done business with him with heat panels.
Btw I have a heat panel if the sale thread.

[drugaria]

I have a few of these. They work great and will easily keep up with winter room temperatures. The down side is that they cost much more to purchase and to operate than flexwatt or a uth. I have 2 by Pro Products and 1 by Reptile Basics. The Pro Products work great but I think that the better thought out design of the Reptile Basics is nicer. www.reptilebasics.com also has an FAQ page for their radiant heat panels which tell you what size that you need for your particular application.

Ok, I got a 120w one from Rich @ RBI and it's working great for my V 432cage. Also got a another v332 cage with a 64 watt pannel from Pro producrs. I'll have to say that the pro products one seems to be better build and is UL certified, but it's also more expensive .
Thank you all for the help

[td30]

I am getting in on this a little late, but here are my thoughts...

The Up's:
I have had 3 RBI RHP's for a few months now and for the most part I like them a lot. They do a much better job of keeping ambient temps up. Before I had the RHP's, I had to heat the entire room up to 82 deg or so and then had UTH's to heat a hot spot. As far as power usage goes, it is much less expensive to heat 3 cages then an entire room.

The Downs:
Here is the down side for me. I had the cages stacked and found that there was WAY TOO MUCH heat transfer from the top of one cage to the floor of the cage stacked on top of it. I was seeing floor temps of around 102 deg. Mind you this is through 1" of PVC (AP cages). I had to put 2" spacers between the cages with insulation in between in order to correct this problem. Just something to think about if anyone plans on using these in stacked cages.

[chetman7]

I finally gave in and bout a 3x2 RBI cage with 80 watt RHP and fluorescent llight and their hides. I can't wait to get it in the mail.

I"ll be sure to post up a nice review as soon as I get my temps correct and constant

total came out to around 320 USD.....I must really love my snake.