Hide Temps?

[NightLad]

The Ball Python Care Sheet advises the following temperatures:

~80F (ambient temps)
~90F (basking temps)
75 or below is unhealthy

90-95 hot side is good, so I’ve read. However, what about the inside of the hides? What is an acceptable ‘hot’ and ‘cool’ temp for those? I don’t want to turn my hot-hide into a little oven! When I had the hot-side ground temp at 90, the inside of the hot-hide was at 100. Is that normal?

[juddb]

Well i would say about 93 or so. But normally if you put a hide right over the basking area the temp will go up a degree or two naturally.

[NightLad]

Well i would say about 93 or so. But normally if you put a hide right over the basking area the temp will go up a degree or two naturally.

Naturally! However, I just wanted to make sure that 100F isn't too hot inside that little plastic hide he seems to love so much (and I would expect him to).

[Argentra]

100 is too high. Try to shoot for no higher than 95. I have my thermo probes inside the hides to measure the temps and just make sure ambient never drops below 80.

[juddb]

100 is too high. Try to shoot for no higher than 95. I have my thermo probes inside the hides to measure the temps and just make sure ambient never drops below 80.

I think 95 is to high myself. Like i said i would shoot for 93.

[Argentra]

Well, I said it as an upper end. I have mine at 92-93 as well.

[NightLad]

Okay, thanks for the advice everyone.

For the record, I didn't leave him in a 100F hide! The temps I was quoting were taken while he was not in the tank and I was testing the optimal temp settings. I made sure the inside hide temp was no more than 95 before I put him back in the tank. I just wanted to know how much 'wiggle room' was acceptable from the recommended settings. Now I know!

Thanks again.