My set up.

[robert7107]

Hooked up helix db1000 put probe between glass and heat pad.. set it 84 used heat gun too check reads 88.8 I'll check again in a hour . No substrate put in yet..ac is on set for 78 but tank isn't near any vents...

Sent from my Nexus 6P using Tapatalk

[Creepy Alien]

I really like the Helix thermostats. I have one on an incubator. It worked so well it's first year, I bought a second for anothet incubator.

[PitOnTheProwl]

Why did you set it to 84? How long had it been running before you temped it?

[robert7107]

I set helix for 84 but when checked temperature it was on 86. I put tank on floor in corner because I wasn't able to get onto tank with it that high.
Also removed helix this morning and iam monitoring temp. Helix may not have been consist trying without




Sent from my Nexus 6P using Tapatalk

[robert7107]

Was originally going to put tank here but actually vents where a issue creating a draft

Sent from my Nexus 6P using Tapatalk

[chrid16371]

I set helix for 84 but when checked temperature it was on 86. I put tank on floor in corner because I wasn't able to get onto tank with it that high.
Also removed helix this morning and iam monitoring temp. Helix may not have been consist trying without.

Sent from my Nexus 6P using Tapatalk

Are you using another thermostat since you removed helix? You must regulate your uth. The first thing I would check as the problem would be the temp gun, I would get an acurite 00891 thermometer or a different brand temp gun to compare to the one you already have.



Sent from my SAMSUNG-SM-G890A using Tapatalk

[robert7107]

Repositioned probe on helix. Have it set for 86.

Sent from my Nexus 6P using Tapatalk