» Site Navigation
2 members and 1,068 guests
Most users ever online was 47,180, 07-16-2025 at 05:30 PM.
» Today's Birthdays
» Stats
Members: 75,945
Threads: 249,142
Posts: 2,572,344
Top Poster: JLC (31,651)
|
-
T8 heating questions
So, even though I just built my own little rack, I've decided to go ahead and get a T8 enclosure from Animal Plastics as well. This particular enclosure will be for one BP when the time comes. Here is the setup I am planning on going with. Keep in mind, This will be in my living room where the winter temps can average around 68-70 degrees.
T8 - sliding glass doors, door lock, white LED.
Reptile Basics - 80w RHP
12"x24" heat tape under one side of the enclosure - This will provide my hot side, from the front to the back of the cage, 12" wide.
Identical hides
water bowl(s) sized for correct humidity
Kraft indented paper substrate
Herpstat II for controlling heat tape and RHP.
Accurites (2) for monitoring ambient temps inside the cage.
My biggest concern was whether or not one RHP would be sufficient for heating the cage with room temps that can dip down to 70 degrees? Should I use two 80w RHP's?
I don't really have any experience with the RHP's, so I'm not sure what they are capable of. My only experience is with heat tape and CHE's.
Thank you.
0.1 BP - Mojave - Lexi
1.0 Bearded Dragon - Thunder (RIP)
0.1 Bearded Dragon - Lightning
"Now you know, and knowing is half the battle." - G.I. Joe
-
-
Re: T8 heating questions
 Originally Posted by LittleTreeGuy
So, even though I just built my own little rack, I've decided to go ahead and get a T8 enclosure from Animal Plastics as well. This particular enclosure will be for one BP when the time comes. Here is the setup I am planning on going with. Keep in mind, This will be in my living room where the winter temps can average around 68-70 degrees.T8 - sliding glass doors, door lock, white LED.Reptile Basics - 80w RHP12"x24" heat tape under one side of the enclosure - This will provide my hot side, from the front to the back of the cage, 12" wide.Identical hideswater bowl(s) sized for correct humidityKraft indented paper substrateHerpstat II for controlling heat tape and RHP.Accurites (2) for monitoring ambient temps inside the cage.My biggest concern was whether or not one RHP would be sufficient for heating the cage with room temps that can dip down to 70 degrees? Should I use two 80w RHP's?I don't really have any experience with the RHP's, so I'm not sure what they are capable of. My only experience is with heat tape and CHE's.Thank you.
We have two T10's. One is divided and heated by two 40 watt RHP's (one for each side). The other is heated by a 80W mounted on one side of the tank; no heat tape in either tank.
We've had perfect sheds since switching to the T10's and no problems with eating. Right now everyone is on a hunger fast; which is usual this time of year. Either later this month or by March everyone starts eating again
Last edited by Stormy; 02-01-2016 at 01:27 PM.
Reason: Hit enter before typing anything!
1.0 Trick Pinstripe (Loki)
0.1 Firefly Axanthic (Oreo)
1.0 VPI Black Satin Black Pastel (Sneaky)
1.0 Pied (Spot)
0.1 Normal (Fatty)
0.1 Bumblebee (Bumble)
1.0 Pastel Genetic Stripe. (Ozzy)
-
-
Re: T8 heating questions
I have two t8s in my living room where the temps can get in the low 70s also. I only have an RHP in each set up controlled by a herpstat 2. It creates the proper heat no problem. I wouldn't personally bother getting flexwatt or anything else, but that's for you to decide. I would also suggest not getting the led strip from AP unless it changes color. Maybe have them drill the slot for it and pick up your own strip. I have a multi color one in both my setups. It's nice to have a blue or red light on for the day time and white for cleanups and whatever.

-
-
Re: T8 heating questions
 Originally Posted by SKO
I have two t8s in my living room where the temps can get in the low 70s also. I only have an RHP in each set up controlled by a herpstat 2. It creates the proper heat no problem. I wouldn't personally bother getting flexwatt or anything else, but that's for you to decide. I would also suggest not getting the led strip from AP unless it changes color. Maybe have them drill the slot for it and pick up your own strip. I have a multi color one in both my setups. It's nice to have a blue or red light on for the day time and white for cleanups and whatever.
 
Awesome, thank you very much. Just curious... what size RHP are you running in your enclosures?
0.1 BP - Mojave - Lexi
1.0 Bearded Dragon - Thunder (RIP)
0.1 Bearded Dragon - Lightning
"Now you know, and knowing is half the battle." - G.I. Joe
-
-
Re: T8 heating questions
80 watt. I also ordered them from pro products and they sent the panels directly to Animal Plastics. AP installed them for me. Neither pro products or animal plastics will charge extra to do this.
-
The Following User Says Thank You to SKO For This Useful Post:
LittleTreeGuy (02-01-2016)
-
Re: T8 heating questions
The 80 watt panels are more than enough for my setups. My living room stays around 70-72 and I have the herpstat keeping the panels at 88 and 89 degrees and that gets me a hot spot of range if 92-96 and ambient temps stay at 80.
-
The Following User Says Thank You to SKO For This Useful Post:
LittleTreeGuy (02-01-2016)
-
I just got off the phone with AP, and the T8 has been ordered.
0.1 BP - Mojave - Lexi
1.0 Bearded Dragon - Thunder (RIP)
0.1 Bearded Dragon - Lightning
"Now you know, and knowing is half the battle." - G.I. Joe
-
The Following User Says Thank You to LittleTreeGuy For This Useful Post:
-
Re: T8 heating questions
Good move LTG. AP makes some great enclosures.
-
-
Re: T8 heating questions
I think I will look into these..
Sent from my SGH-T999
-
-
Re: T8 heating questions
 Originally Posted by Lady mkrj58
I think I will look into these..
Sent from my SGH-T999
I looked at them a LOT... then decided I wanted to try to build a rack, so I did. My wife then proceeds to tell me she liked being able to see the snake a little better and she wasn't ready to have more snakes just yet (part of the reason I built a rack was to get more)... so I went full circle back to the T8. For the price, it just seems to be the best enclosure out there. I haven't really heard anything bad about them.
0.1 BP - Mojave - Lexi
1.0 Bearded Dragon - Thunder (RIP)
0.1 Bearded Dragon - Lightning
"Now you know, and knowing is half the battle." - G.I. Joe
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|