Vote for BP.Net for the 2013 Forum of the Year! Click here for more info.

» Site Navigation

» Home
 > FAQ

» Online Users: 735

2 members and 733 guests
Most users ever online was 47,180, 07-16-2025 at 05:30 PM.

» Today's Birthdays

None

» Stats

Members: 75,909
Threads: 249,112
Posts: 2,572,161
Top Poster: JLC (31,651)
Welcome to our newest member, KoreyBuchanan
Results 1 to 4 of 4
  1. #1
    Registered User
    Join Date
    01-06-2014
    Location
    New jersey
    Posts
    22
    Thanks
    0
    Thanked 2 Times in 2 Posts

    Reptile basics sweaterbox and heating

    Hi,

    Tried to search button but couldn't find the answer. I bought a rb sweaterbox and I have a herpstat 1 to run it. My problem is i'm having a hardtime raising the temperature.

    I have the probe on the second rack from the bottom. Just the probe is touching the heattape and I have the wire right before the probe head meets taped down right next to the heat tape.
    I keep my room temperature at 75 degrees, but even with the herpstat set too 100 degrees My hot spot is still only 83 degrees. I've tested it with my digital thermometer and my heat gun.
    Is it normal or am I doing something wrong?

    Thanks

  2. #2
    BPnet Senior Member don15681's Avatar
    Join Date
    12-07-2009
    Location
    Saltsburg, Pa
    Posts
    1,410
    Thanks
    497
    Thanked 531 Times in 387 Posts
    Images: 108

    Re: Reptile basics sweaterbox and heating

    my room temp is about the same. my herpstat nd is at 91 and my hotspots in my racks temp around 87. my reptile basic sweaterbox rack is up away from the floor. they are sitting on other racks. what is the room temp towards the floor in your room. this can be a factor. also how long has the rack been running to get at these temps? what substrate is in your rack? the hotspot should be the tub or newspaper and not the top of something like aspen if it's in there with any depth. I use newspaper in mine. you need to temp each level and slowly raise the temps on the thermostat until you get where you want to be with the hot spot (tub floor) using the temp gun.

  3. #3
    Registered User
    Join Date
    01-06-2014
    Location
    New jersey
    Posts
    22
    Thanks
    0
    Thanked 2 Times in 2 Posts
    Hey Don,

    Thanks for the reply.
    I just used my temp gun and it looks like the location where I placed the sweaterbox is about 73-74 degrees. I use papertowels and I've had the rack setup since last night. I have a thermometer in the top right where the heat strip is located. I can raise the heat strip temperature to get my hotspot much higher, but wanted to see if anyone else was doing that.
    Your temperatures are something I would expect and makes sense to me.

  4. #4
    BPnet Senior Member don15681's Avatar
    Join Date
    12-07-2009
    Location
    Saltsburg, Pa
    Posts
    1,410
    Thanks
    497
    Thanked 531 Times in 387 Posts
    Images: 108

    Re: Reptile basics sweaterbox and heating

    check the hot spot with the temp gun not the thermometer. just keep raising it until you get it where you want it. you're close now. my rack is about 78 degrees when those racks are from the floor. a few degrees in room temp can make a big difference in getting your hotspot. good luck with it, don

    - - - Updated - - -

    78 degrees as in the air or room temp

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.2.1