» Site Navigation
2 members and 1,007 guests
Most users ever online was 47,180, 07-16-2025 at 05:30 PM.
» Today's Birthdays
» Stats
Members: 75,945
Threads: 249,142
Posts: 2,572,348
Top Poster: JLC (31,651)
|
-
BPnet Veteran
Fine tuning temps
Ok so with a ton of help my cage is all done. I have the Herpstat setup CHE for my heat source. (I know UTH is preferred but just couldn't pull it off in this cage without blowing budget = long story).
I am now trying to fine tune temps. I have the Herpstat probe in a mounting bracket sticking straight up about 4" off of the substrate. It is set to 86.5 so I could achieve that 92 hot spot and a warm hide (Exo-Terra medium cave). Humidity is 55-65 most days.
I was just reading a thread that said ambient should be below 85. 2/3's of my cage is 78-84 from cool to warm. Is my 86.5 on the hot side a touch too hot? should I just lower it to 85?
-
-
no, if you are using a CHE or Heat bulb the hot side is going to be hotter than 85. It is when you are using a UTH (which doesn't change the air temperature in the cage) that you can't the air temperature in the cage to be lower.
In this type of setup the UTH provides the basking temperature at ground level, and you keep the air temperature constant through out the cage (Around 80 degrees)
When using a CHE or heat lamp your only option is to provide a thermal gradient with the air temperature. as long as the cool side is between 78-82 degrees and the hot side is between 88-92 degrees, you will be fine.
~Aaron
0.1 Pastel 100% Het Clown Ball Python (Hestia)
1.0 Coastal/Jungle Carpet Python (Shagrath)
0.1 Dumeril's Boa (Nergal)
0.1 Bearded Dragon (Gaius)
1.0 Siberian Husky (Picard)
0.1 German Shepherd/Lab Mix (Jadzia)
-
-
BPnet Veteran
Should I have the ambient higher on the hot side then say 88?
-
-
When I was using a Heat lamp, I had it set to 90 on the hot side and I kept the cool side at 80. My herpstat's probe was mounted at the surface of the substrate directly under the heat lamp.
Last edited by The Serpent Merchant; 04-09-2012 at 09:38 PM.
~Aaron
0.1 Pastel 100% Het Clown Ball Python (Hestia)
1.0 Coastal/Jungle Carpet Python (Shagrath)
0.1 Dumeril's Boa (Nergal)
0.1 Bearded Dragon (Gaius)
1.0 Siberian Husky (Picard)
0.1 German Shepherd/Lab Mix (Jadzia)
-
-
BPnet Veteran
So I just want the surface around 90-92 then? I have a hot spot that is 92 for surface temps and ambient is 86-86.5 That is ok?
I am probably overly concerned. She has eaten well for me twice in a row now and had bowel movements and a perfect shed so it seems all is well. I just don't want to accidentally cook her. The temp gradient actually seems to be nice an gradual but she does spend most of her time at the cool side. So far even after she has eaten. I caught her basking at night on the hot side a few days after her first meal. I guess she know what she wants so I shouldn't really worry but inexperience and all.
-
-
It sounds like your temperatures are fine, BP's can have cage temperatures slightly higher than the ideal range as long as they have a cool side to cool off in. (but your temps sound perfect to me, nothing to be worried about)
~Aaron
0.1 Pastel 100% Het Clown Ball Python (Hestia)
1.0 Coastal/Jungle Carpet Python (Shagrath)
0.1 Dumeril's Boa (Nergal)
0.1 Bearded Dragon (Gaius)
1.0 Siberian Husky (Picard)
0.1 German Shepherd/Lab Mix (Jadzia)
-
The Following User Says Thank You to The Serpent Merchant For This Useful Post:
-
BPnet Veteran
Thanks! She seems really happy. My 7 year old daughter has fallen in love with her and my wife likes reptiles but really only enjoys handling BP's. I couldn't be happier and thanks again for all the amazing help.
-
The Following User Says Thank You to whispersinmyhead For This Useful Post:
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|