New Cages

[WakoNako]

Hey All.

I know its been a looooooong time since I last posted anything. I've just been so swamped.
Since last being on here, I've gotten married, moved into my own place, started working 12+ hours a day, and finally started making tracks into building 2 new cages.

Specs:
14" high on the interior. 12" high with substrate;
Currently 24" deep. 22" once completed;
Approximately 3'6" across. Interior will be around 3' 3" once completed;
Heated using Flexwatt;
Floor will be made of tile;
Most materials salvaged from work;
Lit interior;
Total cost so far: $30 for 2 14" lights and 6 3" vents.

So far I've spent 2-3 evenings over the space of 2 weeks getting to the stage I'm at.

From the last cage I've learn't not to build so tall, these cages are a full 6" shorter on the interior. I've also learn't not to vent the cage too much or it won't hold humidity.

I framed these cages, clad the exterior and then filled the spaces in the frame with styrofoam. This serves two purposes, first it'll keep the cages warmer meaning I won't need the UTH so high and won't require heat lamps. It also provides a base for me to build decorative walls using grout.

First: Basic Plans




Second: Cage interior so far



Third: Vents and light switch. I wired in a wall switch, in the previous picture the blue box in the back of the switch.



Fourth: Light



Fifth: Light in the dark





Both cages are identical so I only posted the pictures of one. The only difference between them is vent layout as they are designed to sit side by side.

I'm still working on plans for the front and doors.

[DZ Reptiles]

Looks good! whats gonna be going in em?

[LizardPants]

Not bad! Where do you get those vents?

[OhhWatALoser]

If those are like the vents I used to use, might wanna check how sharp the fins are on the inside. Mine were pretty sharp and I saw it as a potential hazard so I put them on from the inside of the cage so the animal wouldn't be exposed to it.

now I don't use vents, I always taped them up anyways, gotta love michigan I guess lol

[WakoNako]

I got a ball python going in each of the cages.

The vents are from lowes. $11 for 6. I couldn't find anything cheaper other than much larger vents and I don't want to cover the vents with duck tape like I did on the old cage.

And the insides of them are rather sharp, but I'm going to remedy that by grouting the edges of them when I grout the walls.

I use a product called Titebond to cover the styrofoam prior to grouting, its like elmers on steroids. We use it when spraying crete on decorative caps so I figured it'd work well for my application. It seals the styrofoam and provides something for the grout to grip to as well. It should hopefully work on the exposed frame too so I can cover them.

[LizardPants]

Please keep us updated when you grout and finish it.

[WakoNako]

I'll do my best.
I'm making these cages as the snakes final home, so currently they're going to be a little big so it looks like i'm going to be spending my free time creating "clutter" to fill them lol

[WakoNako]

Selection of styrofoam "clutter"



For now, this is the only piece I've grouted





I covered it in Titebond, let it set up for a day and then mixed up some grout. I used sanded because its what I already had and I actually put it on quite thick. I only had a little but of cracking, but that was hit with a second layer of grout.
Now all I need to do is seal it. Any ideas on a safe grout sealer for snakes?

[WakoNako]

Today I completed the floor structure for the cages. All thats left to do is the front and the cages will be built, leaving me to just tile and texture the insides.


I cut a piece of wood out of the floor of each cage to the size of the heat mat.


Routed a couple of notches into each board for the flexwatt clips to rest in, providing me a level UTH.


Drilled 1/4" ventilation holes so excess heat doesn't get trapped and build up, then covered the shelf with foil to reflect heat and also keep the flexwatt from touching bare wood. This worked well for me on the first cage I built about a year ago so I repeated it.


The door in place on the bottom of the cage.


Hinges doing their jobs. I used a simple deadbolt catch to keep the door from opening.


Flexwatt in place, small notches allow the wires to come out from the cage.




The floor with concrete board attached. This is for the interior of the cage and the tile will stick to this.


The cages taking up more room than I had anticipated.


Coating walls and ceilings of the cage with Titebond to give the grout something to grip too.


Both cages Titebond-ed and drying.

In a couple of days I will start with the grout hopefully.

[WakoNako]

Picked up my perspex for the windows to the cages yesterday.
Top Tip: Go to Lowes and ask them to sell you some scrap perspex. I got $30 worth of perspex for $2. All in good condition and all a good size. Just split over 4 sheets, but that ain't a problem.