» Site Navigation
3 members and 697 guests
Most users ever online was 47,180, 07-16-2025 at 05:30 PM.
» Today's Birthdays
» Stats
Members: 75,905
Threads: 249,107
Posts: 2,572,121
Top Poster: JLC (31,651)
|
-
-
-
Registered User
Re: is my setup good enough?
-
-
BPnet Veteran
Re: is my setup good enough?
I'm sure it will do just fine. I don't even use hides for my snakes once they get that big but I'm sure it couldn't hurt.
-
-
Re: is my setup good enough?
If the room is over 80 then yes, but if not, then maybe not. The cool side of the enclosure will stay close to room temp(70) and that's not warm enough. Check the temp on the far side(opposite heat pad) and let us know the temp. Racks hold temps a leeeettle better that's why they work.
-
-
BPnet Veteran
Re: is my setup good enough?
unless you live in a very humid area the holes on the top of the lid are not needed. Your heat and humidity will escape from there.
-
-
Re: is my setup good enough?
ive heard that those anolog temp humidity gauges are notorious for being completely inaccurate. your better off with the much recommended accurite digital thermometer/hygrometer(weather station) from walmart/homedepot/lowes. it cost between $10-$15
my current collection
1.2 kiddos
1.0 better half
0.1 mojave ball python (Nyx)
0.1 Dumerils Boa (Hemera)
1.0 Eastern Box turtle
3.4.? rats (? = litter coming any day now)
0.1 dutch rabbit (Lucy)
my "future hopefuls"
0.0.1 pied cockatiel 0.0.1 white bellied caique 0.0.2 guinea pigs
-
-
Re: is my setup good enough?
 Originally Posted by mommanessy247
ive heard that those anolog temp humidity gauges are notorious for being completely inaccurate. your better off with the much recommended accurite digital thermometer/hygrometer(weather station) from walmart/homedepot/lowes. it cost between $10-$15
I agree! I would change those dial thermometer! Here is a good caresheet: http://www.ball-pythons.net/modules/...warticle&id=59
-
-
Registered User
Re: is my setup good enough?
i keep a towel over top of the warm side to hold in heat and help with humidity. stays at 70% consistantly and the temp is usualy around 75-80 on the cool side and around 90 on the warm end. i bought the dial gauges cause i was short on money and me taking the snake was a rescue it now or were letting it go kind of deal. i am already going to purchase a helix thermostat with i think 4 sensors so i can monitor the temp in several different areas of the enclosure and my local petco doesnt have a digital hygrometer but its been a priority to get one. any other suggestions? i want my snake to be as happy as possible.
p.s. the holes on top were put there by my brother when he used it for his bp's since they were stacked, helped him maintain the right temps with them being stacked.
-
-
Re: is my setup good enough?
You can get a thermometer with a build in hygrometer at any hardware or department stores. You don't know the temps at all until you get a digital thermometer. Those other thermometers can be off as much as 10 degrees and they don't measure the ground temp as that is the most important measurement!
Last edited by seeya205; 08-01-2010 at 06:57 PM.
-
-
Registered User
Re: is my setup good enough?
A tip on the Accurite. Its not very accurate. I have a thread above that shows 3 different thermometers, 2 of which are Accurite. The indoor/outdoor wired one is accurate with temps but between 8-10% low in humidity. Not a huge deal to maybe the average pet owner but a big deal to a breeder or big collector.
Pythons
1.2 Normal Ball Python
1.0 Cinnamon Ball Python
Boas
1.0 Yellow Anaconda
1.0 Albino Boa Constrictor
0.1 Het Albino Boa Constrictor
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|