I put the probe first directly on the flex watt and start taking readings a couple of hours later. With my racks, I needed to finally set the probe just a hair away from the flex watt and that did the trick. Use foil tape as that works really well by staying put!!
~~McKinsey~~
"Men have forgotten this truth," said the fox. "But you must not forget it. You become responsible, forever, for what you have tamed."
~The Little Prince; Antoine de Saint Exupery
I use a temp box, with prob taped in the box, right over the heat tape. I set my heat to 88, using spyder robotics thermostat. Buddy tapes probe right to the tape with aluminum tape, you have to set the temp about 4 degrees higher this way, but save you a box...... just my experience.
1.2 Pastel BP
1.0 Spider BP
1.0 Cinimmon BP
1.0 Albino Bp
1.0 Mojave BP
0.12 Normal BP