A Rat Colony When You Have Little Space...

[frankykeno]

Robin has been talking with me about building her rat colony but having a lot of space constraints and since I faced that for a long time (having no basement or big spare room) I thought I'd share a bit about how I dealt with this issue. I choose to not use the more traditional rat racks as I like a bit more interaction with my permanent breeder rats.

This is the original rat rack I had. I actually had two maternity tanks side by side. The bottom cage was Casanova's and where he lived permanently and the four females I had back then cycled in and out with him. Above was 2 ten gallon glass maternity tanks and above that two feeder bins. It was just a little start but it really helped feed our snakes back then (of course we had a lot less snakes then come to think of it LOL). It wasn't a big start but it quickly cut back on our $100 a month feeding bill from the local pet store.



This free standing plastic rack is from WalMart and retails for around $18.00, snaps together without any tools needed and is super easy to keep clean. It's dimensions are 33.5 wide x 14 deep x 55 high (68 high with top tank). I've had this same rack in service for over 2 years now and it's never even developed a crack.

Here's the same rack today. It's currently housing 5 females and their 35 offspring of various ages (some litters are mostly fed off as I need a lot of fuzzies and pups right now). It can easily hold 7 ten gallon tanks though I never put 2 on top as it is a lighter duty rack so I don't trust it being too top heavy.



A very small footprint really for the numbers it can hold.

I combine this rack with 4 large tubs that I get from the local dollar store for about $7.00 per tub (plus of course the cost of hardware cloth to ventilate).

Hardware cloth (about $7.00 for a good sized roll)....



Here's our breeding tub currently housing 1 male and 2 females....



One of the feeder/grower tubs (side view)....



Same tub (top view)....


These bigger tubs are 19 wide x 32.5 long x 13.5 high. The tubs that actually fit the rack (pictured in the first rack) are 16 wide x 24 long x 12 high.

When I figured it out for Robin I came to this conclusion. If you had two of these racks side by side they barely take up the room an entertainment unit would.

You could easily house the following in this relatively small space...

Rack 1:
4 maternity tanks (2 side by side on the bottom two shelves)
1 tub for breeders on the next shelf
1 spare/overflow tub on the top shelf

Rack 2:
2 maternity tanks side by side on the bottom shelf
1 tub for female feeders above that
1 tub for male feeders above that
1 tub for resting females on the top shelf

This gives you quite a lot of bang for a pretty small space buck. You could have a nice working colony of 1 or 2 males and up to 6 or 8 females and you should have enough tanks/tubs to cycle it quite nicely if you plan the breedings out carefully.

Considering Robin doesn't need anything larger than a small/small rat and will likely feed off quite a few large pups/weanlings sizes, she shouldn't run into overcrowding issues but that's why I built the overflow/spare tub into the plan (I believe in having a backup tub at all times just in case).

Hope this was what you needed Robin and it's of interest to the smaller rat colony breeder that doesn't have the ability to spread out in a basement or garage but would still like to breed for the needs of their snakes.

Oh and just for fun! Here's a shot of old Casanova enjoying his retirement. He might be an old 2 year plus rat but he's still King of the Food Dish! LOL

[mlededee]

very cool jo. i've been using something quite similar and it does work very well and takes up little space.

one word of advice though on putting two plastic tubs (aquariums would be fine because of their weight) vertically into the rack side by side--if the tubs overhang the shelves much at all on either end your rats will find a way to somehow make it fall off the rack. :o i put two tubs like that as a test one time and as i sitting on the floor cleaning the tubs below the boogers in one of the vertical tubs managed to make this happen, which resulted in their tub falling on my head, the top flying off, covering me in aspen, water, food and freaked out rats. fun! they must have all run to the edge and jumped up and down or something--i have no idea--but i quickly decided that that wasn't going to be a good idea.

[frankykeno]

That's a good point Emily and exactly why I only allow one plastic tub sideways per shelf. I too tried to put two side by side and found that they overhang too much and to get two plastic tubs to fit on that rack dimension, they are simply too small too be of any real use other than maternity tubs. That's why I went with a combination of plastic tubs and glass tanks and keep the tanks low on the rack to keep it balanced weightwise.

[recycling goddess]

what a GREAT post jo. thanks so much. that really helps me with my "where am i gonna put all these tubs" situation we are just about to start aquiring.

and i love that you can still see and interact with your rats. our breeders are also our pets... so we want to hold them and hand feed them and play with them... the only thing i don't like about your design... if the lack of hammocks. we are a 'havetohavehammocks' colony... even the mamas love to retire to their hammock when they don't need to sit on their pups... so i think... a mesh on the top with large enough squares that we can clip a closepin onto it (to hold up each of the four corners of our hammocks) would make this absolute perfection for our colony!!!

[frankykeno]

what a GREAT post jo. thanks so much. that really helps me with my "where am i gonna put all these tubs" situation we are just about to start aquiring.

and i love that you can still see and interact with your rats. our breeders are also our pets... so we want to hold them and hand feed them and play with them... the only thing i don't like about your design... if the lack of hammocks. we are a 'havetohavehammocks' colony... even the mamas love to retire to their hammock when they don't need to sit on their pups... so i think... a mesh on the top with large enough squares that we can clip a closepin onto it (to hold up each of the four corners of our hammocks) would make this absolute perfection for our colony!!!

You may have to find something other than clothespins Aleesha as I'd worry about doing to any larger mesh. I know my young weanlings can easily jump straight up and will happily hang from this mesh. I'd worry that they'd start to shove their faces into larger mesh and possibly get caught up a bit in it. I'm sure there's something that would hold your hammocks using this mesh size....just haven't had enough coffee to think of what that is yet this morning LOL. I don't personally use hammocks as my colony chewed through them so quickly and I've reached enough numbers that replacing them constantly just wasn't working for me anymore.

[Ginevive]

Nice idea definately. Those shelving units are often on sale at the HDepot, and some that are even cheaper are sold as "garage shelving", made out of metal. I used to have those back in my old bedroom back home (they fit the decor, hehe) and they are nice and sturdy.

[ADEE]

awesome post, i was looking into finding something similar for our pets thanks

[TekWarren]

More here: http://warrenreptiles.com/gallery/ma...?g2_itemId=412

[ADEE]

how do you put the screen in the top of the lids??? can we post pics of that and how you do it, what product are you using also

[derrabe]

forgive me if this has been already asked how did you secure the hardware screen thin to the lids