I feel stupid...

[SCWood]

I got so stupidly excited to see my package today. I set up my thermostat and thermometer when I realized...my tubs won't slide into my rack with a heat pad on the bottom. I'm so disappointed in myself for not checking on this first that I cried I'm terrified to use heat tape because I don't know how any of it works or how to wire it or how to hook it to a thermostat. I don't want to hurt my kiddos. For now, I have it set up in an empty tank to check for accuracy and functionality :/

If you wanna step inside, pay admission at the door...
🐕
🐱
🐍🐍
🐊🐊
Total: 6❤

[JLC]

Heat tape isn't that scary! You can order it from RBI and it will be fully wired and have a plug you plug into the thermostat just like a pad from the pet store.

[efb3]

Just weave one continuous piece of heat tape throughout the rack. ..I tape only the edges of the heat tape down with some aluminum tape. And yeah RBI will connect the ends for you, just measure and see how many feet of heat tape you will need and what width you want.

[SCWood]

Heat tape isn't that scary! You can order it from RBI and it will be fully wired and have a plug you plug into the thermostat just like a pad from the pet store.

That sounds better x.x

Just weave one continuous piece of heat tape throughout the rack. ..I tape only the edges of the heat tape down with some aluminum tape. And yeah RBI will connect the ends for you, just measure and see how many feet of heat tape you will need and what width you want.

How would I do that? I thought I'd need a different strip for each shelf

If you wanna step inside, pay admission at the door...
🐕
🐱
🐍🐍
🐊🐊
Total: 6❤

[Megg]

I've never bought it, but I think you can just tell them you have 3 shelves and you need x feet for each one and you want it to be y width.


Sent from my iPhone using Tapatalk

[gameonpython]

Another idea is heat cable.


Sent from my iPad using Tapatalk

[tbowman]

Heat tape is literally the exact same thing as a heat pad. It's just packaged a bit differently. You set it up the exact same way.

[SCWood]

Another idea is heat cable.


Sent from my iPad using Tapatalk

How does it work?

Heat tape is literally the exact same thing as a heat pad. It's just packaged a bit differently. You set it up the exact same way.

Sounds more like it lol

If you wanna step inside, pay admission at the door...
🐕
🐱
🐍🐍
🐊🐊
Total: 6❤

[SCWood]

So here is my rack

I really like the design of it. I might build another for larger tubs. But I want to do it right. Any heating suggestions that would work better than others? Heat pads are not going to work here, as I found yesterday. I've watched videos on heat tape and I am still wondering why it looks so complicated. So does cable!
Also, note that I have large tubs in this rack as well as smaller tubs.

If you wanna step inside, pay admission at the door...
🐕
🐱
🐍🐍
🐊🐊
Total: 6❤

[Tsanford]

As JLC mentioned you can order heat tape from reptile basics. There is an option when ordering for them for them to finish off the ends for you.

Just measure the length of each shelf and add enough to reach down to the next shelf below. My 28 quart, 7 tall racks used 18 feet worth.

Id recommend 3" or 4". Just weave and use silver aluminum tape to hold it down. Your tubs should fit just fine!



EDIT: I didn't realize it was a closed rack... You may need to have someone help you with it. Put a small hole in the back corner of each shelf in order to wire individual heat tape pieces...

You may definitely need some help if your not that handy.

A lot of keepers loose their collections due to fire... Probably unsafe wiring...