» Site Navigation
0 members and 3,248 guests
No Members online
Most users ever online was 6,337, 01-24-2020 at 04:30 AM.
» Today's Birthdays
» Stats
Members: 75,097
Threads: 248,541
Posts: 2,568,760
Top Poster: JLC (31,651)
|
-
Registered User
Herpstat 2 and an Animal Plastics T8 - Thermostat setting?
I have my new T8 all set up, and I am working on getting the temperature and humidity just right. Can anyone give me a good starting place for a temp setting on the thermostat? I'm eager to get my babies in, but want everything to be perfect. Thanks!
Sent from my TARDIS using Tapatalk
"if you plan for a year, plant rice. If you plan for a decade, plant trees. If you plan for a lifetime, educate people." - Chinese Proverb
1.0 Normal BP - Tiki
0.0.1 Albino Corn - Fuego
0.0.1 Snow Corn - Zero
1.0 Jack Russell - Bosco
1.0 Morkie - Rocky
1.0 Awesome Kid
-
-
I have mine set at 82 or 84. I'm on vacation for a few weeks and can't check now so I can't remember exactly but I believe it's 82. That gives me ranges of 84-91ish in the enclosures. I have two T8s on a herpstat 4 with this setting. I dangled my probe from the ceiling just off the top of the substrate. Set it around that range and see what temps you get with your temp gun. Adjust a degree or two as needed.
Alluring Constrictors
-
-
Registered User
Re: Herpstat 2 and an Animal Plastics T8 - Thermostat setting?
thanks, Marissa! I have my probe under the flexwatt, so I imagine it will take some time to get it right. So excited to have it all put together!!
Sent from my TARDIS using Tapatalk
"if you plan for a year, plant rice. If you plan for a decade, plant trees. If you plan for a lifetime, educate people." - Chinese Proverb
1.0 Normal BP - Tiki
0.0.1 Albino Corn - Fuego
0.0.1 Snow Corn - Zero
1.0 Jack Russell - Bosco
1.0 Morkie - Rocky
1.0 Awesome Kid
-
-
Re: Herpstat 2 and an Animal Plastics T8 - Thermostat setting?
Mines set up under the Flexwatt on the outside of the cage also. The room is heated but I still have to run the Herpstat at 100 to get a hotspot of 90-92 for the boa. It takes some tampering but you'll get it.
-
The Following User Says Thank You to Herpenthusiast3 For This Useful Post:
-
Re: Herpstat 2 and an Animal Plastics T8 - Thermostat setting?
Originally Posted by Xtina
thanks, Marissa! I have my probe under the flexwatt, so I imagine it will take some time to get it right. So excited to have it all put together!!
Sent from my TARDIS using Tapatalk
Oh dur. I just without thinking assumed radiant heat panel since that's what I have. Doh. Sorry. In that case, set to 90, see where that gets you and adjust. That's how I do it when I have to use heating pads.
Alluring Constrictors
-
The Following User Says Thank You to Marrissa For This Useful Post:
-
Registered User
Re: Herpstat 2 and an Animal Plastics T8 - Thermostat setting?
Originally Posted by Herpenthusiast3
Mines set up under the Flexwatt on the outside of the cage also. The room is heated but I still have to run the Herpstat at 100 to get a hotspot of 90-92 for the boa. It takes some tampering but you'll get it.
Thanks, this was what I needed. I can see that I need to set it higher, but wasn't sure how high to go. I've been going up a degree or two...I am WAAAY off right now. Thanks again...this really helps.
Sent from my TARDIS using Tapatalk
"if you plan for a year, plant rice. If you plan for a decade, plant trees. If you plan for a lifetime, educate people." - Chinese Proverb
1.0 Normal BP - Tiki
0.0.1 Albino Corn - Fuego
0.0.1 Snow Corn - Zero
1.0 Jack Russell - Bosco
1.0 Morkie - Rocky
1.0 Awesome Kid
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|