some stacks i made

Since i do not own any balls yet to show,figured i would share acouple of stacks i built.I think they would work great for balls
each stack has four cages that are 3x2x18 high.each with there own heat and light
http://i59.photobucket.com/albums/g3...C/IMG_0209.jpg
http://i59.photobucket.com/albums/g3...C/IMG_0211.jpg
And here they are up and in use
http://i59.photobucket.com/albums/g3...C/IMG_0384.jpg
thanks for looking

good looking cages

almost looking like Vision cages. Good job

Really nice; they look like they would blend well with any decor also. :)

thanks for all the nice comments

You should lay out plans and supply lists. :D Yes yes.


Very nice!

Those look great! Easy on the eyes and usable! :banana:

thanks
I mainly did it by eye BUT i will sit down and figure out everything needed to make one stack.
I do know it was not much money maybe about $150.00 per stack including lights and flex
And once i did the first one the second one only took about 2 hours to build <But that is once i bought all the right tools
Thanks again for the comments

how do you heat it???

I have 11"x18" flextape under each section

That's pretty much exactly what I was explaining to my father in law that I wanted.
I hope he can make me some like that.

See Jenn. That's exactly why we need to get together and beg him to post plans. :)

thats pretty good man-------nice work! :)

Thanks again for all the nice comments
I didn't forget about you all
i will try and post the basic materials list and how to .with some pictures ,today if you still need me to ..

yes, please do

Ok here i go it will take a few post but i will try and explain as much as i can.Remember i did this with no plan.So i might not remember it all
And all the sizes and supplies are to the best of my memory, But should be pretty close
So to make this
http://i59.photobucket.com/albums/g3...C/IMG_0211.jpg
you will need
about 12-1x2's 8 foot long
6-1x4'sx 8 foot long
4 sheets of tile board (actually 31/2 but can only get full sheets)
4-18" lights for the inside
now with the flex i bought 4 -11"x18" already connected pieces
you can go with something else or if your good ,connect them all to one cord
the nthe rest of the stuff is tools,liquid nail,screws ,brad nails or staples,and wood glue
Well i think i covered what is needed
forgot to say .the supplies listed here is to make one stack
6 foot high of 4 seperate enclosures being 3 foot wide x 2 foot deep x 18 " high

Ok now both of my stacks are built diffrent so i will tell you how the one i have pictured is being built
Here you will cut
4-1x2's @6'
and then cut 10-1x2's @ 2'
http://i59.photobucket.com/albums/g3...C/IMG_0220.jpg
Then attach the smaller pieces to the inside of the longer ones
Here is where you will have to evenly space each piece
and make sure that both sides are spaced the same
It should look something like these These will be the sides
http://i59.photobucket.com/albums/g3...C/IMG_0222.jpg
wow this is alot of work doing this ...lol
too be continued

Well I for one have this written down and am awaiting patiently the next chapter of the epic stack building thread. :)

I think he left us Jenn.

Probably for the best as the racks I have take up enough space in this apartment as it is. lol

well I'm still interested :)