Facilities/Snake Rooms...

So lets see what everybody has...I always love seeing others setups...gives me some new ideas sometimes...

Heres an older pic of a corner of the room from earlier this yr....Its a lot more filled up right now but you get the idea....The reason for only the 4 racks is because at the time I had a bunch of them in the quarenteen room and I never got around to taking updated pics....On the 2 walls pictured there are a few more racks...on the other side theres a baby rack and a shelf above with a leo...we also have a seperate quarenteen room which has 3 racks....Right now we are adding a slop sink and redoing one of the walls (a rat got loose and messed up the insulation) so once we get finished with that (hopefully by next weekend) ill get some new pics of the whole entire room instead of that one little corner lol...Heres a crappy pic for now...

http://i75.photobucket.com/albums/i2...r/IMG_7551.jpg

So lets see what everybody elses looks like....

Are those Neil Golli racks? They look alot like my hatchling rack.

Nice :gj:


http://i66.photobucket.com/albums/h2...hon/bprack.jpg

Quote:

---

Originally Posted by TheAudOne

Are those Neil Golli racks? They look alot like my hatchling rack.

---

Sure are....

Very nice Cue!! Love the 2 albinos ;)

Quote:

---

Originally Posted by rocky

Sure are....

Very nice Cue!! Love the 2 albinos ;)

---

Where do you get the Harlan Shredded aspen from? I have to pick mine up right from the warehouse heh.

Quote:

---

Originally Posted by rocky

Sure are....

Very nice Cue!! Love the 2 albinos ;)

---

I thought for sure you were going to say that they were HerpEnclosures racks - look just like mine - or is Neil selling some of Rich's racks now?

Here's my single rack, will be getting another this spring and hopefully a hatchling rack from Rich as well:

http://i37.photobucket.com/albums/e9...k/NewRack3.jpg

I don't have an updated picture, but I can show you a few stages, including racks Im using

https://ball-pythons.net/gallery/fil.../rackTemps.jpg

https://ball-pythons.net/gallery/fil...cleofdeath.jpg

Don't mind the tubs on top of that one, this was the day of getting in a lot of snakes, and ended up with snakes > racks for a few.

I remember the first time you posted all those hatchling racks - and when you got in those 400 babies! LOL

Quote:

---

Originally Posted by cueball

Nice :gj:


http://i66.photobucket.com/albums/h2...hon/bprack.jpg

---

where are you wires heat pads temp sensors and such?? its a good looking wire tuck!:rockon:

Quote:

---

Originally Posted by rabernet

I remember the first time you posted all those hatchling racks - and when you got in those 400 babies! LOL

---

I know, insanity, never again hehe.

Quote:

---

Originally Posted by SnakeySnakeSnake

I know, insanity, never again hehe.

---

To add onto your insanity - I remember how much you enjoyed soldering all those tubs too! :P

You guys must clean out wal mart and kmart of the accurite temp/hygro meter lol!

Quote:

---

Originally Posted by rabernet

To add onto your insanity - I remember how much you enjoyed soldering all those tubs too! :P

---

:rolleye2: :rolleye2:

Quote:

---

Originally Posted by jdmls88

You guys must clean out wal mart and kmart of the accurite temp/hygro meter lol!

---

Imagine trying to find 300 tubs :)


But as far as having an accurite in every tub... the nice part about racks that are all on the same piece of flexwatt, and if your warm air is circulating in the room keeping top of rack and bottom of rack similar temps, you don't need an accuwrong in every tub.

I did this for a little while in my one rack, and I found out that all of the temps stayed constant as well as humidity (makes sense when you use the same heat, same tubs, same substrate in every tub.

Plus I found out that the accu"rite" were often off as much as 3-5 degrees and 10-20% humidity, even if they were all placed in the same tub.

Good enough for an approximation, but I ended up going with a temp gun instead. If you run through your tubs you can verify they are all the same/almost identical.

Quote:

---

Originally Posted by rabernet

I thought for sure you were going to say that they were HerpEnclosures racks - look just like mine - or is Neil selling some of Rich's racks now?

Here's my single rack, will be getting another this spring and hopefully a hatchling rack from Rich as well:

---

Oops...forgot to add that....3 are from Rich...the others are from Neil...sorry about that...

SnakeySnakeSnake...I love the way those baby racks are setup....were they filled with imports? Or CB snakes?

haha every time i go into walmart and see the tubs i always think of all you guys searching high and low for them.

Threads like this just make my brain hurt. I need to take new pics. :rolleye2:

K~

Quote:

---

Originally Posted by rocky

Oops...forgot to add that....3 are from Rich...the others are from Neil...sorry about that...

SnakeySnakeSnake...I love the way those baby racks are setup....were they filled with imports? Or CB snakes?

---

I thought I recognized the slots in the side of one of them, and the same Sterilite tubs! :P

Quote:

---

Originally Posted by rocky

SnakeySnakeSnake...I love the way those baby racks are setup....were they filled with imports? Or CB snakes?

---

Imported CH.

Quote:

---

Originally Posted by rabernet

http://i37.photobucket.com/albums/e9...k/NewRack3.jpg

---

The soldering job on that ventilation deserves cookies, gold stars AND margaritas!!! I wish mine looked as consistently even as those do. :D

K~

Quote:

---

Originally Posted by rocky

Very nice Cue!! Love the 2 albinos ;)

---

Thanks! Although I need to take some new pics as those two ablinos have been replaced :nerd:

Quote:

---

Originally Posted by KLG

The soldering job on that ventilation deserves cookies, gold stars AND margaritas!!! I wish mine looked as consistently even as those do. :D

K~

---

Template! :)

Quote:

---

Originally Posted by rabernet

Here's my single rack

---

Nice rack Raber :D

I always liked those lil seperation thingies you use....so smart!

Quote:

---

Originally Posted by cueball

Thanks! Although I need to take some new pics as those two ablinos have been replaced :nerd:

---

Ahh!! By what???? lol

Quote:

---

Originally Posted by jdmls88

where are you wires heat pads temp sensors and such?? its a good looking wire tuck!:rockon:

---

The thermo is in the upper left hand corner, the heat tape runs under the tubs, the thermo probe and wiring are flushed into the side...whooooosh :cool:

Quote:

---

Originally Posted by SnakeySnakeSnake

Template! :)

---

LOL!!! True. Of course, I usually just default to Freedom Breeder & forego soldering altogether! ;)

K~

Kara, any chance we could see your blood room? ;)

Quote:

---

Originally Posted by rocky

Ahh!! By what???? lol

---

These two dorks...fire and spider :nerd:

http://i66.photobucket.com/albums/h2...n/DSCN0897.jpg

haha nice bro! males or females?

Quote:

---

Originally Posted by KLG

LOL!!! True. Of course, I usually just default to Freedom Breeder & forego soldering altogether! ;)

K~

---

Lol...Trendy McMoneybags :P

Quote:

---

Originally Posted by rocky

Kara, any chance we could see your blood room? ;)

---

Oh sure...I will take some new pics in the AM. My camera is loaded with Tokay pics from tonight, so bear with. ;)

K~

Quote:

---

Originally Posted by cueball

Lol...Trendy McMoneybags :P

---

Hey man...Kev had good ideas early on. If you're going to be the snake guy, it helps to be friends with the cage guy. ;)

Quote:

---

Originally Posted by KLG

Oh sure...I will take some new pics in the AM. My camera is loaded with Tokay pics from tonight, so bear with. ;)

K~

---

Thanks Kara! Looking forward to the pics..

Any pictures yet Kara?

Quote:

---

Originally Posted by Entropy

Any pictures yet Kara?

---

They'll be posted when I get to it. My plate's a bit full at the moment. :)

In the mean time, there are some older pics here, here and here.

Quote:

---

Originally Posted by KLG

In the mean time, there are some older pics here, here and here.

---

WOW, ive got to come up there and visit you guys!!!! Thats amazing.

kara- nice collection!

this little one just melted my heart- http://newenglandreptile.com/tour/tokay.jpg he/she's too cute!

Nice set-ups everyone!! I'll have to take some updated shots of ours soon.

Someday Kara, but for now, I can only dream......:rolleyes: I love the Balls to the Wall!! I also saw your Habitat Systems Limited custom job in their portfolio they sent us. We are getting about $20 K worth of custom exhibits from them for a future exhibit hall at the aquarium, and I couldn't be more excited!!! Finally some non-native herp exhibits at work!...but shhhhh, you didn't hear it from me...:D Can't wait to see more pics!

-Evan

Here's our dining room (who needs to actually dine in one when you have a computer and a sofa?) First, the rack:

http://img.photobucket.com/albums/v6...vive/rhack.jpg

Then, our BCI cage; atop is little Luna, our '06 from Cue, in the r-maid.

http://img.photobucket.com/albums/v6...ive/bciand.jpg

Also have the new het in quarantine in a seperate room.

Quote:

---

Originally Posted by SnakeySnakeSnake

Template! :)

---

Nope - I did those freehand! So there! :P