With my sterilite tub where should I have my thermastat probes. Under or on top of the newpaper substrate/
10-22-2005, 03:19 PM
ddbjdealer
Re: Probe Placement
What are you heating with? If heat tape, from what all I've read, you would put the probe directly on the heat tape. Set the heat tape to a temp that will translate into the proper temp for the inside of the enclosure. It takes some tinkering, but once it's all set, you won't have to fool with it as much as ambient room temps increase/decrease.
10-22-2005, 03:52 PM
greenmonkey51
Re: Probe Placement
I am using flexwatt.
10-22-2005, 04:21 PM
daniel1983
Re: Probe Placement
I put the probe directly on the heat tape. But since my tubs are slightly lifted off of the heat tape, I have to set the thermostat a bit higher than 95. It is not really a problem since i have a temp gun to make sure the enclosure floor temp is 94 all the time...which it is :)
10-22-2005, 07:55 PM
Adam_Wysocki
Re: Probe Placement
Ditto what Daniel and Ken said.
When you put the probe on the heat tape, make sure you bury it with duct tape! ... I cover it so that no outside air can touch it. ;)
Good luck.
-adam
10-22-2005, 10:56 PM
greenmonkey51
Re: Probe Placement
So I right now I have the probes on top of the newspaper. So I should put the probes under the tub and on top of the flexwatt.
10-23-2005, 12:11 AM
Adam_Wysocki
Re: Probe Placement
Quote:
Originally Posted by greenmonkey51
So I right now I have the probes on top of the newspaper. So I should put the probes under the tub and on top of the flexwatt.
Flexwatt is the same temperature on both sides, I would not sandwhich the probe between the flexwatt and the enclosure.
-adam
10-23-2005, 12:29 AM
greenmonkey51
Re: Probe Placement
So I should just leave the probes in the enclosure like they are.
10-23-2005, 12:42 AM
Adam_Wysocki
Re: Probe Placement
Quote:
Originally Posted by greenmonkey51
So I should just leave the probes in the enclosure like they are.
If that's what works for you.
-adam
10-26-2005, 12:38 AM
greenmonkey51
Re: Probe Placement
Ok, I moved the probes under the newspaper, and got the right temps, but when I put the probes for the thermometers on top I got different readings, but the thermometer probes wont stay put, should I go with the thermastat probe temps.
10-26-2005, 12:07 PM
greenmonkey51
Probe Placement again
I've moved my thermast probes under the newspaper, and got the right temps, but when I put the probes for the thermometers on top I got different readings, but the thermometer probes wont stay put, should I go with the thermastat probe temps.
10-26-2005, 12:21 PM
Smulkin
Re: Probe Placement again
I am merging this with your other thread - no need to restart the same topic.
