Snake room design and build

The Friday before Christmas I closed on a little 6 acre farm. So I will be moving from Baltimore, Maryland to just north of Gettysburg, Pennsylvania. In the basement is a room that is 30'x14'. The room is currently concrete floors, block walls, open ceiling joist, with a fire place. The plan is to turn this space into my snake room. I'm starting with designing and collecting materials for now. The actual build will happen in a few months or early spring.

So far I'm planning on studding out the walls, insulation and drywall. Ample electrical outlets and lighting. Some lights in the room may also get put on a timer since the windows are small and let in limited amounts of light. The flooring will probably be snap together laminate planks. The ceiling I haven't decided if I want to do a hard ceiling or drop tiles. There is a utility sink just outside of the room to aid in cleaning and water changes. Considering the size of the space I will probably use 2 oil filled radiator style heaters to keep ambient temps up. I plan to make the room as snake escape proof as possible. I'm also going to have cctv cameras in there incase on does escape from their tank I can just play back the footage to see where they went and to protect from possible theft. I've thought about adding some type of fire suppression system but still need to research a lot more to find a animal safe option.

I'm open to suggestions, comments or questions ya'll may have about the build. This room will mostly have my corns, kings, and carpets. The retics, atb, bci, and balls will probably all be in another room.

https://ball-pythons.net/forums/cach...364dcdbf_o.jpg

https://ball-pythons.net/forums/cach...f7c15ebb_o.jpg

https://ball-pythons.net/forums/cach...4fea6350_o.jpg

Very nice! Two suggestions:

- Wood stove as backup heat in case of power outage, unless you plan to block up the fireplace.

- I've had the snap-in laminate flooring in my kitchen. It's not very durable and dents when stuff falls on it, didn't hold up well to getting wet, and scuffed easily if I had to move stuff around. I'd look at something more durable and soft/forgiving line vinyl tile, and there are some products that "float" instead of being glue-down so you don't get mold build-up between the flooring and concrete if the basement is at all damp.

Thanks for the suggestions.

For back up heat I have a generator, plus the chimney is a dual flue with the other tap being set up on the other side of the wall for a wood stove.

I might rethink the flooring then.

Quote:

---

Originally Posted by 67temp

Thanks for the suggestions.

For back up heat I have a generator, plus the chimney is a dual flue with the other tap being set up on the other side of the wall for a wood stove.

I might rethink the flooring then.

---

If was me... would just paint and epoxy the floor. Easy to clean and if done correctly looks great. Throw some sand in the wet epoxy to give it more friction if you are worried about slipping. Would do same for the walls but would insulate them to help with temps.

Quote:

---

Originally Posted by Skyrivers

If was me... would just paint and epoxy the floor. Easy to clean and if done correctly looks great. Throw some sand in the wet epoxy to give it more friction if you are worried about slipping. Would do same for the walls but would insulate them to help with temps.

---

I live in PA and can second how convienent an epoxy basement would be. It’s been a rainforest here this summer and my basement has been wet all year. The cool thing I never thought of with a basement reptile room is how consistent your ambient temp would be.

I am so excited to see how this turns out! It would be cool to see some progress updates and then the finished room of course. :)

Quote:

---

Originally Posted by DandD

I live in PA and can second how convienent an epoxy basement would be. It’s been a rainforest here this summer and my basement has been wet all year. The cool thing I never thought of with a basement reptile room is how consistent your ambient temp would be.

---

I've been to the house 5-6 times now in the past few months. Every time I've been there, standing water has been in the yard even though it's on a hill. Thankfully though there have been no signs of water leaking into the basement. One house I looked at had several inches of water on the basement floor. It's been a record year for precipitation in this region.

Quote:

---

Originally Posted by WhompingWillow

I am so excited to see how this turns out! It would be cool to see some progress updates and then the finished room of course. :)

---

I plan to update this thread often and with lots of pics during the course of the build.

I lived in that area for many years. I would recommend sealing the walls and floor with epoxy also. Even if you are not seeing water I believe moisture and then mold could become an issue. Much easier to deal with now then later.

Bill

I’ll second Bill’s suggestion to make sure it is sealed. My Mom’s basement has no standing water or visible leaks, but the moisture in the walls is off the hook. This promotes mold growth if we don’t run the dehumidifier. Better to treat before you add studs and insulation. You may want to use studs and insulation that are pretreated for mold resistance as well.

Thats a Great room. Im Jealous hahaha. Congrats [emoji108][emoji2533][emoji108][emoji2533][emoji108][emoji2533][emoji86]


Sent from my iPhone using Tapatalk

Congrats on the new home and best wishes with your critter room. Looking forward to the progression thread.

Congrats man, is going to be a great snake room!! :gj:

i would really love to see updates

Quote:

---

Originally Posted by IADdrummer

i would really love to see updates

---

The short answer is life has a way of sidetracking projects.

We took our time moving which pushed back when our MD house got on the market. I've been splitting my time between the MD house, Pa farm, and breeding season. We close on the MD house the begining of july. So once we aren't paying 2 mortgages that will free up money for materials. The trans in my truck is also going up so I'll either need swap in a new one or buy a new truck so I can transport all the materials.

So far I've gotten the room prepped. The walls got coated with dry-lok. The floors got an epoxy coating. I removed two pull cord light sockets w 60w bulbs and replaced them with 3 sockets on a single switch with 100w daylight LED bulbs. I also put in an electrical outlet for power tools and a 4' florescent light. Obviously I like a well lite work area. The current plan for the walls is 2" foam next to the cinder blocks, stud out the walls and add more insulation.