Time For My Incubator Build

It's time for me to start building my incubator, so I am going to post my build plan and hopefully you guys can criticize constructively.

For starter's this is what I want to use:

http://www.igloo-store.com/detail/IGL+52QT+FAMILY+BL

My plan is to layer the bottom with water bottles (which is to help keep stable temps right?), if there is an alternate, better, method please let me know.

Next I am going to put a shelf in the middle, where I can put the eggs tubs.

Here's where I am stuck, I am having a hard time deciding how I am going to put the heat tape. I was thinking one long strip of 3 inch tape (approx 80 inch in length) lining the cooler to have constant heat from all around. This will be placed just under the shelf.

No matter what heat source I choose to go with, I will be using a Herpstat to control the temps.

Please feel free to suggest any and all ideas.

Quote:

---

Originally Posted by that_dc5

It's time for me to start building my incubator, so I am going to post my build plan and hopefully you guys can criticize constructively.

For starter's this is what I want to use:

http://www.igloo-store.com/detail/IGL+52QT+FAMILY+BL

My plan is to layer the bottom with water bottles (which is to help keep stable temps right?), if there is an alternate, better, method please let me know.

Next I am going to put a shelf in the middle, where I can put the eggs tubs.

Here's where I am stuck, I am having a hard time deciding how I am going to put the heat tape. I was thinking one long strip of 3 inch tape (approx 80 inch in length) lining the cooler to have constant heat from all around. This will be placed just under the shelf.

No matter what heat source I choose to go with, I will be using a Herpstat to control the temps.

Please feel free to suggest any and all ideas.

---

You know you can buy a 120qt coleman cooler at walmart for only a couple more dollars right?

Quote:

---

Originally Posted by Domepiece

You know you can buy a 120qt coleman cooler at walmart for only a couple more dollars right?

---

Actually I didn't but thanks for the heads up.

Same idea as yours. I have planned to buy a 52 or 54 quarts igloo for incubator, I have also heat tape, herpstat and small fan. But its very difficult to find here a egg crate. Good luck to both of us!

I lined the bottom of my cooler with heat tape then put the water bottles over them and covered that with light diffuser(aka.egg crate). I ran all the wires and probes through the drain hole. Hope this helps, my temps are stable.

Here is a picture of one I just finished making for someone. I have built a couple dozen of these for people with good success. I start with a Coleman 120 quart cooler attach PVC to the bottom of it and run 7 feet of three in Flexwatt crisscrossed back and forth between the PVC. For the shelf I use the metal mesh shelving usually used for linen closets. Then a Herpstat thermostat to regulate it. I have never used water bottles in the bottom of them and have thrown one out in my garage when it was 40-50 degrees and it stayed within a half degree of its set point.

http://users.tbc.net/~gknaack/coolerincubator.JPG

George

Quote:

---

Originally Posted by glkherp

Here is a picture of one I just finished making for someone. I have built a couple dozen of these for people with good success. I start with a Coleman 120 quart cooler attach PVC to the bottom of it and run 7 feet of three in Flexwatt crisscrossed back and forth between the PVC. For the shelf I use the metal mesh shelving usually used for linen closets. Then a Herpstat thermostat to regulate it. I have never used water bottles in the bottom of them and have thrown one out in my garage when it was 40-50 degrees and it stayed within a half degree of its set point.

http://users.tbc.net/~gknaack/coolerincubator.JPG

George

---

How do you keep the humidity at almost 100% w/out any water bottles in there?

Most of the time people use closed tubs.


Check out what's new on my website... www.Homegrownscales.com

Some people use the water bottles to help smooth out temperature fluctuation they aren't normally used to increase humidity. Personally I haven’t found this to be necessary for the type of incubators I build. For humidity I place the eggs in shoe boxes with no holes an inch or two damp vermiculite and the lid on. I do the same thing in my big upright incubators as well.

Quote:

---

Originally Posted by glkherp

Some people use the water bottles to help smooth out temperature fluctuation they aren't normally used to increase humidity. Personally I haven’t found this to be necessary for the type of incubators I build. For humidity I place the eggs in shoe boxes with no holes an inch or two damp vermiculite and the lid on. I do the same thing in my big upright incubators as well.

---

Ok fair enough, but my question then is still how does he keep the humidity up in the cooler?

Quote:

---

Originally Posted by Mike41793

Ok fair enough, but my question then is still how does he keep the humidity up in the cooler?

---

your humidity will be IN the egg tub..:gj:

Ahhh I get it now, hes not just setting the eggs in there, theyd be in the tub in the cooler. Thank you for explaining lol!
And to glkherp: I realized my last post to you may have sounded kinda snotty, didnt mean for it to sound that way, my apologies. :)

No worries, didn't take it that way at all.

Thanks,
George