» Site Navigation
1 members and 754 guests
Most users ever online was 47,180, 07-16-2025 at 05:30 PM.
» Today's Birthdays
» Stats
Members: 75,905
Threads: 249,105
Posts: 2,572,111
Top Poster: JLC (31,651)
|
-
BP housing
I wanted to see if giving my bp a more vertical enclosure with branches and what not to climb (considering 4ft tall) on would be an ok thing to do or could that cause any problems?
-
He won't use it at all. That's why Ball Pythons are Terrestrial snakes and not semi-arboreal or arboreal. They spend their lives in burrows, so having a vertical cage wont get used and will only end up in your python getting injured after falling.
4 feet is very tall and if your snake fell from that distance, he would almost certainly have some injuries from it. Keep Ball Pythons low to the ground and keep the heat up and your fine!
-
Re: BP housing
thanks i still want to build a new enclosure considerably smaller of coarse, since it would be out of wood could splinters be a problem?
-
Make sure to sand it an seal it
-
Re: BP housing
Awesome, thanks for the help
-
Re: BP housing
Quote:
Originally Posted by Novak
Awesome, thanks for the help
Your very welcome
-
seal it well and then seal it a few more times.. and make sure thee plywood doesnt have pine, the sealent is suppose to make it not matter but why take the chances?
a side not tho if you wanted to give it a bigger cage why not a wider cage? like 3 or 4' wide it would problably enjoy that
wat part of pittsburgh u from? im 10 min from the city lol
-
Re: BP housing
Some ball pythons enjoy climbing...especially when they're still relatively small. I do agree that 4' is serious overkill and potentially dangerous...but a climbing branch in an enclosure that is around 18"-24" tall might be used if you have an adventurous sort.
The downside to having that much height is it gets more challenging to keep the proper temperature and humidity ranges...but it can be done if one wants to put in that kind of effort.
-
Re: BP housing
its not a good idea to build something like that. ur snake will not use it, it will be a huge pain to try to clean, ur temps and humidity will be all screwed up, the size will prolly stress ur snake out, and ur prolly gonna get feeding issues and most likely a sick snake. simple is better, trust me.
-
4 of 7 of mine climb on occasion.
"Starting in the early evening, even if the lights are still on, ball pythons will emerge from their shelters. If hungry they will hunt and may even climb on branches close to the ground." Philippe de Vosjoli 'The Art of Keeping Snakes'
"Despite being heavy bodied, Ball Pythons can climb adeptly. We there-fore provide a minimum cage height of two feet and elevated perches." Bartlett and Bartlett 'Snakes'
I'd also say that 4 feet is likely too high I'd suggest that 16-18 inches is quite enough. I have no problems with Humidity or heat at all in a 30x24x18 enclosure. It is all down to how it is set up. Well sealed plywood should not be too much of a problem but well sealed is the key. I'd usually recommend paint with a drying time of at least a week and personally I'd go with two and as warm a temp as you can manage cool temps slow the out gassing of paint. If you have deep pockets a liner polyurethane (2 part) paint cannot be beaten but it is very costly. Have you looked at using PVCx ? it is an extruded plastic works like wood and can be joined similarly it isn't super expensive either. Slightly more than ply.
-
Re: BP housing
I live in Colorado and am looking for a cage set up that is stackable. Also needs to be able to hold humidity well as it is pretty dry here. Been looking at Showcase Cages and would like to know what you all think.
http://www.showcasecages.com/cage_pictures.htm
-
They look quite nice, I wonder if they are probe to sagging like the vision ones? They look to be a similar material. I also wish there was an in between size 24x16 is a touch small for an adult ball but the 36x24 is a bit big. I have a huge female that would like it however.... :P
-
Re: BP housing
Quote:
Originally Posted by Range Rat
I live in Colorado and am looking for a cage set up that is stackable. Also needs to be able to hold humidity well as it is pretty dry here. Been looking at Showcase Cages and would like to know what you all think.
http://www.showcasecages.com/cage_pictures.htm
Looks pretty sharp. I'd do a search on fauna's BOI and see if the company lives up to it's gorgeous website. If so...and if you think the price is right...I'd say go for it. Very nice stuff!
|