Re: How to set up a PVC cage (AP T8) With Pictures!
Quote:
Originally Posted by
Willie76
Just an FYI. Ordered my T8 w/divider a little while ago and forgot to ask about the t-stat probe cutout. I called Ali from AP (just a dream to work with..we talked another 10 minutes!) to inquire what side the probe/wire channel was cut into the bottom of the enclosure. By default, the probe/wire channel is cut into the right side (looking at the enclosure from the front) BUT when she sees a divider is ordered, she makes a note to also cut a center probe channel. Though she does her utmost to ensuure this isn't missed, always a good idea to call them after you order so they don't miss the center probe cut when you need to use both sides. They can also cut center AND left sides...so you have a spot in all 3 locations (left, right, & center)...for more versatility. As of today, there is no additional charge for this and they don't plan on a charge in the near future.
I will definately be ordering more here this year.
hi,
i'm new to the forum and new to BPs. I am planning on getting my first BP (maybe 2!) at the upcoming Tinley Park show. I just ordered the T8 as well, and I am glad I read the above post , because I will have to call them myself today to make sure that center channel is cut.
Thanks for all the information.
alan
Re: How to set up a PVC cage (AP T8) With Pictures!
This post was a great guide. I set mine up very similar to Serpent Merchant but with RHPs instead of Flexwatt.
http://img.tapatalk.com/d/13/03/03/4une5u5a.jpg
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
Re: How to set up a PVC cage (AP T8) With Pictures!
im just gonna guess this hasnt been asked in this thread because i dont want to scan through all the responses on this thread....
i read somewhere that flexwatt needs a gap for air flow between cages when stacking or it could be hazardous?
so i was wondering if anyone does anything extra when stacking AP cages or others to prevent this?
any response will help thanks guys!
Re: How to set up a PVC cage (AP T8) With Pictures!
Quote:
Originally Posted by
zumTod076
im just gonna guess this hasnt been asked in this thread because i dont want to scan through all the responses on this thread....
i read somewhere that flexwatt needs a gap for air flow between cages when stacking or it could be hazardous?
so i was wondering if anyone does anything extra when stacking AP cages or others to prevent this?
any response will help thanks guys!
When regulated with a thermostat (which flexwatt must be) There is no need for an air gap as the thermostat will prevent any heat build up from occurring.
Re: How to set up a PVC cage (AP T8) With Pictures!
ahh okay, i shall stack away!! haha
imma screenshot this part of the thread to hold it to ya! loljk
Re: How to set up a PVC cage (AP T8) With Pictures!
Quote:
Originally Posted by
BPnamedOdin
New here...I have a BP who is out growing the ten gallon aquarium I currently have him in and was looking at one of these pvc cages to house him in. I have a few questions though. First would a animal plastics T-1 or T-3 be big enough for a full grown male? (He isn't full grown yet but I don't want to have to make another purchase. and I know the T8 is cheaper but I don't want something that big, unless I have too.) Also the room I keep him in generally stays around 68- 70 in the winter so I am guessing that I will need a RHP. How exactly does that work...will it just sit ontop of the cage or do special holes have to be cut or something? Also How exactly do keep a hot spot with that without the ambient temps being too high? I am guessing I will need a flex watt as well? Will that work with an in. of cypress mulch substrate?
Also a question not related to pvc specifically but what size repti basics hide would work for a 300g BP but allow room for not replacing it for a while.
Thanks for the help.
I would certainly go with the T-8 with the pop-in/pop-out divider. You can divide the enclosure 50/50, 70/30, 80/20 and so on until they're full grown. Call Animal Plastics about RHPs or shoot them an email. They can tell you which ones they prefer and once ordered, they can be directly shipped to Animal Plastics and they will get them tapped for you. Just my own suggestion.
How to set up a PVC cage (AP T8) With Pictures!
Quote:
Originally Posted by
BPnamedOdin
New here...I have a BP who is out growing the ten gallon aquarium I currently have him in and was looking at one of these pvc cages to house him in. I have a few questions though. First would a animal plastics T-1 or T-3 be big enough for a full grown male? (He isn't full grown yet but I don't want to have to make another purchase. and I know the T8 is cheaper but I don't want something that big, unless I have too.) Also the room I keep him in generally stays around 68- 70 in the winter so I am guessing that I will need a RHP. How exactly does that work...will it just sit ontop of the cage or do special holes have to be cut or something? Also How exactly do keep a hot spot with that without the ambient temps being too high? I am guessing I will need a flex watt as well? Will that work with an in. of cypress mulch substrate?
Also a question not related to pvc specifically but what size repti basics hide would work for a 300g BP but allow room for not replacing it for a while.
Thanks for the help.
Get a t-8 with a divider, go get another snake :)
How to set up a PVC cage (AP T8) With Pictures!
You will just use screws to mount the RHP to the roof, inside the enclosure.
Here is a pic of my RHP's mounted in my T8.
http://i1250.photobucket.com/albums/...-37-53_964.jpg
Sent from my iPhone 5 using Tapatalk
Re: How to set up a PVC cage (AP T8) With Pictures!
Ok, finally got my T8's setup and have a humidity question:
Cages are setup with lights and RHP's from Pro-Products, using Cypress Mulch for Bedding (roughly 2") deep. Using Herpstat 2 and digital Hygrometer/Therm combo from Xikar.
I have the probes from the Herpstat on the opposite end of the RHP, right above the bedding, mounted on the back wall. I also have the Hygrom mounted on the back wall on the cool end as well.
I put the cypress mulch in and installed the glass doors, turned on the lights, set the Herpstat 2 for 90. The probes are reading 79 - 81 on the cool end, but the humidity is reading 90% on my Xikar with an ambient of 90 also.
I don't have my Bp's in the cages yet, but am concerned about controlling the humidity. I'm not sure if I should reduce the Herpstat Temp Settings a little lower or remove some of the bedding? I don't even have water in the water dishes yet.
thoughts or suggestions would be greatly appreciated.
Thanks