Re: Herpstat trouble shooted. Tested and succeeded. Safe to put back in?
Quote:
Originally Posted by
danielwilu2525
Alright I'll try that. However the hot spot started to get above 95. After I shut it off. Hopefully everything is all well.
Sent from my iPhone using Tapatalk
So, you have the Herpstat and probe set on the outside of the tub between the UTH and the tub? And then you are getting a reading of 93 from the Herpstat? And then this 95 is coming from a temp gun on the inside of the tub on the floor? At the exact same spot as where the Herpstat probe is? I mean once you have that changed and let it sit a couple mins until it stabilizes. Then temp gun the probe from inside the tub and see if the probe temps matches the Herpstat reading.
I mean your temp gun could be off a couple degrees too and when you temp gun anything, you want to do it within an inch or less as the air can change the temp as well on the gun.
Re: Herpstat trouble shooted. Tested and succeeded. Safe to put back in?
Quote:
Originally Posted by
danielwilu2525
Alright I'll try that. However the hot spot started to get above 95. After I shut it off. Hopefully everything is all well.
Sent from my iPhone using Tapatalk
I'll be honest, im thinking nothing is wrong and your not familure with how to regulate the Herpstat.. My Herpstat Probe created a Air Pocket under the UTH and it is not as HOT there as other parts of the UTH so i have to set the Herpstat to 96 at the Herp probe spot and that is acually 91 above the glass at the Hotest soot of UTH. If you check the Hotest Spot of my UTH Itself its actually 101.....
Dont compair herpstat temps to your thermometer temps, that wont work.. Set the Hepstat to whatever gives your Thermometer a hot spot of 90 degrees no matter what the Herostat says.. Also make sure you set it to DIMMING as the Pulse setting made my temps climb to high... Also set your Herp alarm to 5 degrees H&L of whatever you end up setting the Herpstat to that gives you a 90 hot spot and turn Sound ON so you can hear the alarm if it gets to hot.....
If your reading this and Im totally wrong about whats going on then i give up, sometimes communicating and writing back and forth ends in more confusion than help hahahahha.
Re: Herpstat trouble shooted. Tested and succeeded. Safe to put back in?
Quote:
Originally Posted by
Mr Sully
I'll be honest, im thinking nothing is wrong and your not familure with how to regulate the Herpstat.. My Herpstat Probe created a Air Pocket under the UTH and it is not as HOT there as other parts of the UTH so i have to set the Herpstat to 96 at the Herp probe spot and that is acually 91 above the glass at the Hotest soot of UTH. If you check the Hotest Spot of my UTH Itself its actually 101.....
Dont compair herpstat temps to your thermometer temps, that wont work.. Set the Hepstat to whatever gives your Thermometer a hot spot of 90 degrees no matter what the Herostat says.. Also make sure you set it to DIMMING as the Pulse setting made my temps climb to high... Also set your Herp alarm to 5 degrees H&L of whatever you end up setting the Herpstat to that gives you a 90 hot spot and turn Sound ON so you can hear the alarm if it gets to hot.....
If your reading this and Im totally wrong about whats going on then i give up, sometimes communicating and writing back and forth ends in more confusion than help hahahahha.
Yeah you said it right. I'm completely new to this. I did what you did and set the stat to 100. The hotspot is giving me a 88-94 spot. I gave it 20 minutes to stabilize. At some points it went to 95 but then went back down to 94 almost instantly. I'll update tomorrow morning. Thanks for the info everyone!
