Baby Rack in the making

Ok so here is the finished product minus the flexx and backing
http://i711.photobucket.com/albums/w...211/011-11.jpg

Quote:

---

Originally Posted by BLong7211

Ok so here is the finished product minus the flexx and backing and iron on edging to cover the exposed particle board on top

---

Looks good!

Looks Amazing! Now make a How to Do so I can make one just like it;)

-Superb Exotics

Quote:

---

Originally Posted by Superb Exotics

Looks Amazing! Now make a How to Do so I can make one just like it;)

-Superb Exotics

---

Ok well a how to do is very very easy if you have a home depot near you since the melamine is precut into pre determined lengths and widths.

Product list

6 shelves @ 16" X 48" But they are actually 15 3/4" X 48" (9.98 each plus tax)

2 sides @ 15 3/4" X 28 3/4" (Just need to buy one side and have them cut it to the height of the sides desired in my case it was 28 3/4") (13.97 each but you only need one because one side piece comes in 96" length)

1 shelf @ 15 3/4" X 36" since you only need 5 dividers @ 4 5/8" you can use the shorter shelf home depot has in stock. ( I had home depot cut these for me since my saw can't cut that wide) (8.87 for the 15 3/4" X 36" shelf)

30 6qt sterilite tubs from walmart (94 cents each)

The backing you can use the peg board with holes in it or you can use the solid peg board with no holes or whatever you want really. The dimension for this piece should be 27 1/2" X 49".

1 box of 2" drywall coarse thread screws.

20 pcs of scrap wood or dowl rod. I had some scrap stuff from here I used as the tub stoppers since I wanted my tubs to stay as close to the front as I could.
1 1/2 Pizza Boxes ( LOL this is what I laid down on the shelf then put the tubs ontop of it then set the next shelf to be put in ontop of the tubs)

Tools

Table or Hand Router to route out sections in the dividers and each end of the shelf. (Only need this if your planning on using belly heat)

Drill

Measuring Tape

Sharpie Marker

Thanks and the size for screw.......

-Superb Exotics

Edit: Just went down to check dimentions and only have room for half the rack. Can you do a DIY for just half the rack. :please: :please: :please:

Quote:

---

Originally Posted by Superb Exotics

Thanks and the size for screw.......

-Superb Exotics

Edit: Just went down to check dimentions and only have room for half the rack. Can you do a DIY for just half the rack. :please: :please: :please:

---

Half which way length or height?

Length........

-Superb Exotics

Nice Job!! looks great.

Quote:

---

Originally Posted by Superb Exotics

Length........

-Superb Exotics

---

You could always have them cut the 48" shelves to the desired size needed