What is holding that lid down????!!!!!! I hope you realize the snake can and will reach the top and open it!!!! I would totally ditch that top and use a correct one. You are only asking for trouble.
Mike
I only have that top on for now because my house/area is rough on humidity. Ever since I put that top on my humidity stays perfect between 55-65%. It is actually very heavy, and I will secure it incase of any problems. I have a normal top with 2/3 of it wrapped in tinfoil and duct tape but it just wasn't cutting it. Once it starts to get warmer in a month or so I should be fine with that. Thank you for the advice, I don't wanna lose my BP
02-22-2009, 04:58 PM
imh0813
Re: How's my setup?
I have the accurite held up by one of them velcro things, ya know where one sticks to the glass the other to the accurite.
Rich at RBI is the best. A lot of us here use his stuff.
02-22-2009, 05:25 PM
DutchHerp
Re: How's my setup?
eBay is also a good place to check.
I got my Raytek MT4 (excellent temp gun) for 35 + shipping, even though MSRP is like 80.
02-22-2009, 05:59 PM
littleindiangirl
Re: How's my setup?
Looking good, we love our temp gun. I think pro-products.com sells a small 20 dollar one. Could be wrong?
02-22-2009, 10:02 PM
DutchHerp
Re: How's my setup?
Quote:
Originally Posted by littleindiangirl
Looking good, we love our temp gun. I think pro-products.com sells a small 20 dollar one. Could be wrong?
You're not :)
02-23-2009, 02:14 AM
ScottyDsntKnow
Re: How's my setup?
Do you have the UTH on a thermostat? Also definitely get that lid secured. I also have the screen top with the tape/foil that you're talking about and since I've done it I have had no issues with humidity. I am also using moss though. Mist once a day and humidity stays in the mid 60s.
You also would want 2 identical hides so the snake doesn't pick a favorite and then overheat or cool off too much. If that is a 5.5 gal tank it is not giving you much room to work with... A 10 gallon will give you enough room for 2 small hides and a 20L is what you'd get to set you up for the life of the snake. I had my young BP in a 10 gal but I just put together a 20L tank for my ball and got a TON of input from everyone on the forum so I just went through what you are going through now lol.
02-23-2009, 12:59 PM
imh0813
Re: How's my setup?
Quote:
Originally Posted by ScottyDsntKnow
Do you have the UTH on a thermostat? Also definitely get that lid secured. I also have the screen top with the tape/foil that you're talking about and since I've done it I have had no issues with humidity. I am also using moss though. Mist once a day and humidity stays in the mid 60s.
You also would want 2 identical hides so the snake doesn't pick a favorite and then overheat or cool off too much. If that is a 5.5 gal tank it is not giving you much room to work with... A 10 gallon will give you enough room for 2 small hides and a 20L is what you'd get to set you up for the life of the snake. I had my young BP in a 10 gal but I just put together a 20L tank for my ball and got a TON of input from everyone on the forum so I just went through what you are going through now lol.
its a 10 gallon ha, guess it's hard to tell in the picture? But yeah like I said once it starts to warm up a bit and gain in humidity in about a month I think the screen top will be fine
02-24-2009, 12:16 AM
ScottyDsntKnow
Re: How's my setup?
Then get the reptile basics hides, put one one each end and put a UTH on some sort of controller in there if you don't have one already.
