Re: AP T3 Question: I've had the worst of luck
I'll try that. Thanks for the idea.
Re: AP T3 Question: I've had the worst of luck
Quote:
Originally Posted by elevatethis
Just a little advice on the probe placement...when I had my T3, I used foil tape to secure the probe directly to the heat cable at the point where the cable comes out of the rear of the cage. Use another thermometer inside the cage to get a reading of the temp you need, and adjust your thermostat to that. If you want to get 92 on the floor, inside the warm hide, you might have your heat cable running at 94-95. The problem with having the probe inside the cage is that your snake is almost surely at some point to move it, and that could totally throw off your tstat.
That worked for me, just thought I'd throw that out.
Definitely! Especially with heat cable like that which can run EXTREMELY hot.
Re: AP T3 Question: I've had the worst of luck
I did mine close to elevatethis only I taped my probe from my Helix right on the inside of the cage floor where the heatcable is underneath. Set my Helix at 93 degrees and it works great. Hot side floor temps stay between 92-93 degrees. I double check floor hot side temps w/ my temp gun.
Good Luck!
