First herpstat have a question?

Double-check the temperature inside the tank with an IR temp gun, and just dial in the Herpstat setting to whatever it needs to be to get your actual ground temperature where you want it. Check under the substrate to make sure that part of the tank also isn't getting too hot. I'm still working on dialing in my settings to balance the ambient and ground temperature from my CHE. Also try to get the temperatures where you want them before putting your snek in there if possible.

Quote:

---

Originally Posted by elleon

Double-check the temperature inside the tank with an IR temp gun, and just dial in the Herpstat setting to whatever it needs to be to get your actual ground temperature where you want it. Check under the substrate to make sure that part of the tank also isn't getting too hot. I'm still working on dialing in my settings to balance the ambient and ground temperature from my CHE. Also try to get the temperatures where you want them before putting your snek in there if possible.

---

Yeah I'm running it with no substrate no animal it's just empty tubs just to make sure I got everything on point...

Sent from my Pixel XL using Tapatalk

Quote:

---

Originally Posted by tttaylorrr

this sounds like the unit is working as intended. maybe it just doesn't like 89.5° lol.

---

Must be the .5 lol. Change it to 93 now it is 92.8 -93.3 but actually reads 93 with a 20%power
.

Sent from my Pixel XL using Tapatalk