Ball python heat tape question PLEASE HELP

Thanks guys for your help I'm going to go with the six inch and I will cover it with a blanket if need to thanks again for your help I appreciate it

Sent from my SM-G925T using Tapatalk

Quote:

---

Originally Posted by frostysBP

I run 3 inch on my hatching rack(6qt) and 6in on my bigger racks.

Sent from my A521L using Tapatalk

---

And sorry I'm new to the forums on this app and thought I would need to post it in different sections but just 1 tread for now on and thanks for the pointer

Sent from my SM-G925T using Tapatalk

Don't do 6" you won't get any type of gradient. It' will be hot and hotter the snake won't be able to escape the heat at all. 3" is plenty just cover the sides and back and you should be fine. I'm in PA as well and my old place over the winter was 61 degrees from February till mid April and we have both back heat and 3" belly neither had an issue keeping temps right.

Quote:

---

Originally Posted by meeistom

Don't do 6" you won't get any type of gradient. It' will be hot and hotter the snake won't be able to escape the heat at all. 3" is plenty just cover the sides and back and you should be fine. I'm in PA as well and my old place over the winter was 61 degrees from February till mid April and we have both back heat and 3" belly neither had an issue keeping temps right.

---

So even if I turn the temperature down on the thermostat and monitor the heat inside of the tubs with a heat gun the 6" will still be too much for them???

Sent from my SM-G925T using Tapatalk

And I don't have any back heat source, only belly

Sent from my SM-G925T using Tapatalk

I think what he meant was that getting the ambient to where it needs to be will leave no gradient. No hot side or cool side. This will be because the 6in covers most of the bottom of the tub. So therefore whether on the hot end of the acceptable threshold or the cool, the snake has no where to go if it wants to regulate itself. Meaning the whole tub is one temperature. I live in new England and will never build a rack that is not enclosed because of the winter. The only way i would is if i moved into a facility.

Sent from my SM-N900P using Tapatalk

Ok I understand

Sent from my SM-G925T using Tapatalk

Thanks again everyone for the help

Sent from my SM-G925T using Tapatalk