Re: Mesh Top Modification
Quote:
Originally Posted by
Mykuhl
Just a heads up on the use of a plastic top.....if it is acrylic then the top will sag down over time(the thinner it is the faster it will happen), causing the corners to curl up a bit. This will let some heat out but more importantly I will let out quite a bit of humidity. This sag will be noticeable in as little as a couple of days if the acrylic is thin.
1/8" and it is spread out over the mesh itself not along the edges. I am considering doubling it up in parts and using some flaps to overlap the cage top itself.
Quote:
Originally Posted by
mohawk
Instead of making the hole larger, you can just get a smaller dome ........ I use the Flukers 5" size with a CHE.
I have got them on sale online for only like $10.
Definitely an option, and probably a good idea simply for a backup. Found one on amazon for 11$ but it's only rated for 75w.
Re: Mesh Top Modification
Quote:
Originally Posted by
Foxton
1/8" and it is spread out over the mesh itself not along the edges. I am considering doubling it up in parts and using some flaps to overlap the cage top itself.
Definitely an option, and probably a good idea simply for a backup. Found one on amazon for 11$ but it's only rated for 75w.
The ones I get are rated for 100w. I got a few from petco.com when they have 20% off online sales.
Re: Mesh Top Modification
It will still sag or bow even laying on top of a metal mesh screen top. I came up with the same idea years ago and it did this every few days or so with 1/8th of an inch. Had to keep flipping over the top. The more you can reinforce it and attach it to the top of the tank the better. It will save you the frustration.
