XPVC rack built with MANY THANKS to Simple Man!!!

Is that stuff found at lowes or home depot?

I used Kreg Pocket-hole screws. You can get them at Home Depot.
http://www.amazon.com/Kreg-SML-F125-.../dp/B0006444U2

You can get everything but the xpvc and flextape at lowes. There is a separate "where to get your xpvc" thread in the DYI section...

Quote:

---

Originally Posted by womsterr

I used Kreg Pocket-hole screws. You can get them at Home Depot.
http://www.amazon.com/Kreg-SML-F125-.../dp/B0006444U2

You can get everything but the xpvc and flextape at lowes. There is a separate "where to get your xpvc" thread in the DYI section...

---

Where did you get yours, Curbell?

yes Curbell for the 5x8. Robert Bowden industries for th 16" board...

Looks really good and professional Tom, I might have to build my next rack like yours instead of buying another one.

Quote:

---

Originally Posted by womsterr

The self tapping screws worked great - i definately suggest going that route.
I built a 10 rack and a 7 rack with the stuff below but here are the costs as best i can split out for that unit. I had extra left from what is listed below for a 2nd rack...

Total costs:
2 5'x8' boards, cut $190
16"x10' boards $60
Screws $2
8-15 qt/6-31qt $94
Flexwatt 23ft $54
Total $400

---

Im just curious....did you find somewhere local to you where you could purchase the xpvc, or did you order it?