Re: Question about building a tub
Well the warm side should be like 90-92. It really depends on what substrate you are using and the temps in your house. I found that I kind of had to play with it.
For example I have two racks...one is set at 95.6 and the other is set at 96.7....inside the rack my bins are a perfect 91-92 on the hot side. So I would suggest setting it up...and then keep checking and adjust as needed to get the perfect temp.
I can tell you the best investment I ever made was a temp gun. You just shoot the area you want to know the temp of and it will give you the high end and the overall temp of where you are shooting. I picked mine up at reptilebasics.com
Re: Question about building a tub
Quote:
Originally Posted by
BPelizabeth
well first of all...I don't know who that is...but that tub is too high and too short for a ball python. A typical tub depending on size for an adult is a 32qt long or a large female is 41 qt long. Hatchlings can go into a shoebox type tub.
I don't know who that person is either,I just liked his method the best. I have a 41 qt rubbermaid, that is about 3 feet long and a foot wide and roughly a foot tall
Quote:
Originally Posted by
BPelizabeth
Second of all he is NOT using a thermostat to regulate that UTH which is a huge no no. These can run up to 110-115 degrees which could kill a snake. Your temps on the warm side should be about 91-92. His info regarding the thermometer is correct...that is a good one to use and I like that he put the cord part on the outside as they can get tangled in that.
Yes, I've read about this,thank you for the reminder :D
Quote:
Originally Posted by
BPelizabeth
Thirdly.....if you have the uth being controlled by a thermostat you will not need a light as long as your ambient temps and the cool side temps stay about 80-82. Though Im confused if your room is not heated how it is 78-79 in PA. So just double check that. If they are not....and you are having trouble keeping your cool side in the low 80's I might suggest a space heater.
I'm in Philadelphia, in a one bedroom apartment,and the thermostat in my room reads 79-80, the heat is turned off,my windows are closed,the weather has been fair lately
Quote:
Originally Posted by
BPelizabeth
As for the moss....you need to be careful with it as it can hold too too much moisture and cause scale rot. A good substrate is Aspen....or you can use paper towels or newspaper. It is very clean and there are no issues of ingesting when feeding day comes. But that is just what I use. Typically if they are in a tub...especially where you live it will generate the humidity needed from the water bowl. Just drill 3 holes on each side....and two in the front to start with. If you see the humidity is too high still...drill more holes.
I use coco husk/eco earth and sphagnum moss to keep the humidity up in such a large tank, i mist constantly, i took her to the vet the other day shes scale rot free
Quote:
Originally Posted by
BPelizabeth
Also and I totally mean no disrespect at all...but you come across a little harsh with your comments. Let me tell you...everyone for the most part on here is really cool and just want to help. We never want to give anyone bad information so we always ask lots of questions just to make sure we know what you have and what you need.
I wasn't trying to be harsh, the use of capital letters was for the reader to make note of, not to be used as if i'm shouting it at you ; I thank everyone who's ever answered my topics and has helped me in my taking care of my ball, it makes me feel more calm that so many people own so many snakes and know through experience of what to do,once again,thank you all
Quote:
Originally Posted by
BPelizabeth
I hope this helps you!! :)
it has, thank you much :D
Re: Question about building a tub
Anytime you need help just let me know!! Good luck!! ;)
Re: Question about building a tub
Quote: I don't know who that person is either,I just liked his method the best. I have a 41 qt rubbermaid, that is about 3 feet long and a foot wide and roughly a foot tall
This should be only 6 inches tall and about 29X18 inches! You need to get the under the bed 41 quart tub! This sounds like the tall syle 41 quart!
Re: Question about building a tub
Honestly, this guy is making a tub setup seem VERY complicated. Setting up a tub for a ball python is very very easy.
http://bp.kaorte.com/tubsetup.htm
This is my little guide on how to setup a snake tub. I would highly recommend getting a thermostat right off the bat, and not a rheostat.
