DIY XPVC Rack - Complete with pics!

Quote:

---

Originally Posted by Simple Man

I made the hatchling rack and would not recommend the way I did it. I ended up with 6 wide x 9 levels for 54 tubs total. I should have cut it in half and did 3 wide by 9 levels. As it stands now if I redid it I would make two 9 level 3 wide racks.

The Flexwatt, if you run it correctly will be on the back half of the 32qt. The snakes will use it when they need to or go to the other side. I haven't had any issues at all. If the snake is too big for that then you really should have them in a 41qt.

Regards,

B

---

Ok so the snakes will use the lengths of the tubs instead of the depths for their hot/cool sides. That's what I was wondering. Thanks

~SC

This might be a stupid question, but on the Professional Plastics website, what are the xpvc sheets listed as?

Quote:

---

Originally Posted by Blackyote

This might be a stupid question, but on the Professional Plastics website, what are the xpvc sheets listed as?

---

You can't use their website. You need to find a local office and deal with them. Their website isn't updated or accurate in terms of pricing. This is a chore for people that don't mind a bit of footwork and phone calls :) But if you do that and get a relationship with your local supplier it will pay dividends in the long term.

Regards,

B

sweet! wanna build me one? LOL

Quote:

---

Originally Posted by decensored

sweet! wanna build me one? LOL

---

I think the shipping might be cost prohibitive :D

Regards,

B

I have one last question that I can think of at the moment,

Would I be able to use Vision tubs with the cuts you showed us in your diagram on page 8? I really like the quality of those tubs more than the sterilite but I REALLY wanna make both of your racks: the 15/32 qt and the 41 qt. I would use the V-35 instead of the 32 qt if that is possible. If not, I can always work with sterilite. I would have to use the 28 qt though because my walmart doesn't carry the 32 qt tubs.

Please let me know your thoughts as I am thoroughly confused with the differences between the sterilite tubs and the vision tubs. If anybody could tell me what the V-tubs are equivalent too I would GREATLY appreciate it (How many qts is a V-15/V-18/V-35 etc). I already know that the V-70 is basically the CB-70 and I know it will fit fine with your 41 qt rack so thats not an issue :)

Thanks so much,
SC

Quote:

---

Originally Posted by stupidcracker00

I have one last question that I can think of at the moment,

Would I be able to use Vision tubs with the cuts you showed us in your diagram on page 8? I really like the quality of those tubs more than the sterilite but I REALLY wanna make both of your racks: the 15/32 qt and the 41 qt. I would use the V-35 instead of the 32 qt if that is possible. If not, I can always work with sterilite. I would have to use the 28 qt though because my walmart doesn't carry the 32 qt tubs.

Please let me know your thoughts as I am thoroughly confused with the differences between the sterilite tubs and the vision tubs. If anybody could tell me what the V-tubs are equivalent too I would GREATLY appreciate it (How many qts is a V-15/V-18/V-35 etc). I already know that the V-70 is basically the CB-70 and I know it will fit fine with your 41 qt rack so thats not an issue :)

Thanks so much,
SC

---

Perhaps someone that uses those tubs can help more. You're going to have to buy your tubs and modify the design to use something else. Sorry I can't be more help! Good luck.

Regards,

B

Quote:

---

Originally Posted by Simple Man

Perhaps someone that uses those tubs can help more. You're going to have to buy your tubs and modify the design to use something else. Sorry I can't be more help! Good luck.

Regards,

B

---

Ok thank you anyways lol :) I knew I should have started a new thread for those questions... Which I'm going to do right now :P

Thanks again,
SC

Anyone find a good priced dealer in the los angeles area for the xpvc ?

Simple Man, where did you find the 15 and 32 quart tubs for the rack on the 1st page? I found them on the Sterilite website, but I find it odd that you can't order directly from them??

Also, you say in the first post that the shelves are 24 x 17 but your cut reference sheet says 24 x 18. Was that just a typo?