Can someone post me a link to where I can find a good melamine edging tool?

Can't find it at my local home cheapo and the lowes near me doesn't carry melamine anymore period. I saw one on amazon but I also remember seeing someone post one here for cheaper and available at one of the local chains.

Thanks in advance.

How thick is the melamine you are using? if it's 3/4" you won't need the edging tool

Are you talking about the edge banding or how to trim the edge banding?

Whenever I edged some melamine for my boss, (built a cheapo entertainment center) i just used a router to shave the excess material off.

A razor blade works great on trimming the edges. Just have a sharp blade and hold it flush.

Found mine right in the aisle with the melamine, it was right with the edging itself. I have also seen one that is around $60 and trims both edges simultaneously.

http://i208.photobucket.com/albums/b...k/IMG_0014.jpg
http://i208.photobucket.com/albums/b...k/IMG_0015.jpg

Quote:

---

Originally Posted by Clear

A razor blade works great on trimming the edges. Just have a sharp blade and hold it flush.

---

I use a razor blade, too.

Razor blade and sandpaper it is

Even if you dont have a razor blade, a sharp knife works just as good. Just make sure you hold it flat and do not scratch the mcp