==HERPSTAT 2=== Two 700 watt propotional thermostats in one

Dual output proportional heating constantly monitors and adjusts amount of heat necessary to maintain a target temperature (Usable range from 50°F to 110°F or 10°C to 45°C). Can also be used in non-proportional (on / off) mode.

• Second output configurable for Heating / Cooling / or Lighting with simulated
sunrise / sunset and Moonlite feature.

•Sensor Matching allows the user to digitally calibrate the sensor output to match other equipment.

•Power Matching allows the user to increase / decrease the proportional power output curve to match the enclosures efficiency.

•Coil Warming feature for enclosures using heating coils to increase accuracy.

•Night Drop feature built in with real time clock allows individual night drop settings for each output.

•Cooling function allows control of basic cooling devices.

•High / Low temperature tracking helps monitor heating system and enclosure efficiency.

•Individually selectable High / Low temperature threshold alarms.

•Precision sensors with internal resolution of .1125 °F and is accurate to ± .9 °F

•Display and setting in tenths of a degree.

•Alarm Clock feature great for daily reminders.

•All settings are retained in memory even if power is lost.

•Power Outage detection / tracking.

•Temperature can be set / displayed in Fahrenheit or Celsius.

•Easy to read backlit LCD display.

•Removable sensors allow for easy replacement if necessary.

•Resettable fuses never require replacement.

•Each output is fused separately keeping an outage on one output from affecting the other.

•Audible alarm system

•Internal error detection shuts off heat if sensor fails or is disconnected.

•Internal temperature sensor monitors heat and controls internal fan. Also shuts down outputs
if overheated for safety. Restarts automatically once cooled.

•Device firmware is user upgradeable with optional USB cable.

•Device status is viewable online with emergency e-mail and vtext alerts (USB cable and
software required).

•700 Watt rating for each output (1400 watts total output) sufficient for most incubators, rack
systems, enclosures, and vivariums.

•1 year limited warranty

http://img.photobucket.com/albums/v4...herpstatII.jpg

ALL OF THIS FOR ONLY 239.00??? WOW JUST CLICK ON THE LINK BELOW TO ORDER. THANKS FOR LOOKING AND GOD BLESS.
-MATT GRAYBEAL
304-836-5147

Quote:

---

Originally Posted by justcage

•Device firmware is user upgradeable with optional USB cable.
•Device status is viewable online with emergency e-mail and vtext alerts (USB cable and software required).

---

So you can check to see if your thermostat is working online? If so, that is freakin cool. Does the software and USB cable come with the Herpstat II? If not, how much does it cost?

So if I was looking to setup a small adult rack and a seperate hatchling rack, the herpstat II could run both?

Yuppers it can do all you said and more.... The price for the hardware to connect it to the net has not been set in stone yet... When everytign is finalized it will be on the HERPSTAT II page.. Cool huh, I like the fact that when I go on vacation in a month I can get onlone and check my temps in my cages and call a buddy if thier is a problem...Sweet!!!

Thats great. I will keep an eye open for the page update. I think I might test one of those out this year :D