Humidity way too high.

So I've finally got everything in my AP T8 cages working and set up but the humidity is way too high for a ball python. With the glass doors closed and within a few hours it hits 90% I live in the Midwest and my room naturally sits at 60%. What is the best way to fix this, drilling holes? If so how big should the holes be and how many will it take to reach an optimal level?

I have the same issue with my tub, humidity is too high.... The only fix I have found is opening it now and then for 5min that fixes it for a few hours..... Holes might work, I'm not sure, if anyone knows a better solution please share!

Sent from my LG-D855 using Tapatalk

You can drill holes but no one can tell you how big or how many you soecifically need.. That will depend on the enclosures location. Start with a few holes, let the tank even out and add more if you need to.

what are you using for substrate?

Cyprus mulch as the substrate.

Did you pre-dry the substrate? I never really saw anything instructing I do this, but I found that with a tank that doesnt have much airflow, moist substrate will skyrocket your humidity

Air/heat dry the substrate in advance so it starts out in the enclosure maybe too dry and mist gradually until the humidity is at the desired level.


Sent from my iPhone using Tapatalk

Once your substrate dries out it will drop down. Or switch to something like aspen or newspaper. Every time I add new damp substrates my cages jump to 100% for a couple days.

Change your substrate would be the easiest option
I've seen some funky ways of using dehumidifiers if you fancy rigging something like that up tho.

I have to drill holes in all of my tubs for the same reason. It's a really simple fix. Small holes is all you need, thinner than a pencil. I use my dremmel to drill the holes. I drill holes as needed. If I notice the tub is still too humid I drill more. Usually one row of holes across the top front of the tub is enough. If you ever need more humidity you just cover the holes with tape.