Vote for BP.Net for the 2013 Forum of the Year! Click here for more info.

» Site Navigation

» Home
 > FAQ

» Online Users: 623

1 members and 622 guests
Most users ever online was 47,180, 07-16-2025 at 05:30 PM.

» Today's Birthdays

» Stats

Members: 75,905
Threads: 249,104
Posts: 2,572,108
Top Poster: JLC (31,651)
Welcome to our newest member, Pattyhud

My First BP Setup

Printable View

  • 07-14-2015, 03:24 PM
    nightwolfsnow
    My First BP Setup
    http://i282.photobucket.com/albums/k...s/CAM00241.jpg
    http://i282.photobucket.com/albums/k...s/CAM00242.jpg

    I got the 10 GAL Basic Tropical Kit from Petsmart. I thought that would be cheaper than getting all the stuff for the 10 GAL I already had. But the items included seem to be pretty low quality, so I probably wouldn't buy it again or recommend it to anyone. I was having problems holding humidity above 40% with one layer of foil. So I added two more layers and increased the surface area covered with the smaller piece. Did I leave enough room for ventilation? I've also noticed that when the lamp is off the humidity increases. It came with a 50W day bulb, should I get a different bulb? I tried my purple nighttime bulb, I think its a 70W that I use over my 20 GAL terrarium, but the ambient heat got into the mid 90's in combination with the heating pad. Without the day bulb the ambient temp is only 72-75. I'm thinking the heating pad is pretty sucky. Neither big box nor any specialty pet stores in my area carry any heat pad thermostats (which I find very very odd). I've got a Hydrofarm MTPRTC coming on Thursday which will help me see how bad the heating pad is. I'm also considering going back to get a thermometer with an actual substrate probe for the hot side and moving the digital one I have in there now to the cool side. I just put the crappy one that came with the kit up because I had it. Also, I'm worried that my hides are too big. I have a 90 gram 2015 on the way. I looked for little plant saucers and bowls in Wal-mart and Lowe's but couldn't find any that weren't clear. I'm also concerned the little cat water bowl will tip over easy. I couldn't find the souffle cups.

    Thanks in advance for any input guys!

    P.S That container is just sitting up there so I can soak and weigh my snake when he arrives.
  • 07-14-2015, 03:50 PM
    Reinz
    My First BP Setup
    Don't turn on your heating pad until you get your thermostat hooked up!

    Go ahead and use the a higher wattage heat bulb, but go to lowes or Amazon and get a table top dimmer switch for it for less than ten bucks.

    http://images.tapatalk-cdn.com/15/07...1e538912f6.jpg
  • 07-14-2015, 03:52 PM
    bigSAK
    I'm no expert but I've done tons of research and just got my first BP the other day but I'd recommend getting another temp/hygro guage to monitor the other side... from everything I've read you don't need day/night temp changes. Cold side ~80deg hot side ~90deg at all times. You can get a rod to hang that lamp off to raise it so temps don't get so high (mid 90's) or you can get a dimmer for the bulb.. Good Luck!
  • 07-14-2015, 04:04 PM
    nightwolfsnow
    Okay thanks guys. I just unplugged the heating pad, the bottom of the tank over the heating pad did feel pretty warm and I don't want to risk a burn. My snake is supposed to be arriving any time now. I don't want to run to Lowe's because my delivery got delayed due to inclement weather half way through so I have no set time frame now. I'll either send my boyfriend out for the dimmer or run and get it as soon as I put Orochimaru in his tank.
  • 07-14-2015, 04:18 PM
    M.P.C
    Your humidity goes up because the lights off and not drying out the air, you can keep a water bowl with good surface area within the lamps heating area to counter this
  • 07-14-2015, 04:21 PM
    frostysBP
    Re: My First BP Setup
    Why are you doing to soak the snake when you get it? Not necessary and is going to be more stressful. You are also going to want a thermometer with a prob attached directly to the heat pad to help dial it in with a dimmer switch.

    Sent from my LGL15G using Tapatalk
  • 07-14-2015, 04:41 PM
    nightwolfsnow
    Re: My First BP Setup
    Quote:

    Originally Posted by M.P.C View Post
    Your humidity goes up because the lights off and not drying out the air, you can keep a water bowl with good surface area within the lamps heating area to counter this

    Yeah I figured that was the cause. My humidity dropped to 50 again. So I will rotate the lamp to the side with the water dish and see if that helps.
  • 07-14-2015, 04:45 PM
    nightwolfsnow
    Re: My First BP Setup
    Quote:

    Originally Posted by frostysBP View Post
    Why are you doing to soak the snake when you get it? Not necessary and is going to be more stressful. You are also going to want a thermometer with a prob attached directly to the heat pad to help dial it in with a dimmer switch.

    Sent from my LGL15G using Tapatalk

    I read somewhere that the snake should be soaked after shipping to rehydrate and clean off any urine and such. Is this not a good idea? I've shut the heating pad off for now until my heating pad thermostat comes in the mail Thursday. My boyfriend just went to Lowe's for the dimmer which I'm using for the heat lamp.
  • 07-14-2015, 04:48 PM
    nightwolfsnow
    Actually I'm confused about the water dish now. I read that you shouldn't put the water dish on the side with the heating pad because it could get spilled and cause a stress crack. And the lamp should be on the hot side right?
  • 07-14-2015, 04:59 PM
    frostysBP
    Re: My First BP Setup
    Lamp should probably be more towards the middle..it all depends on ur temps tho. If your ambiance are high enough you don't even need a lamp just a uth. Ur humity can be fixed by thrown out the repti carpet and go with cypress mulch or eco earth. They hold humity great and don't mold as easy....or you can gö with the repti carpet and make a humid hide.

    Sent from my LGL15G using Tapatalk
Powered by vBadvanced CMPS v4.2.1