Need help ASAP! Rack temps
I have a Herpstat 2 connected to my rack system i set the herpstat to 93f so i can hit a hotspot of 90f
but my thermometer is reading 100f
should i be worried about it?
should i set thr herpstat lower temp?
FYI- i have a ZillaŽ Thermometer (which i question its accuracy)
i order a AcuRite thermometer but its suppose to come Monday
thank you in advance
Re: Need help ASAP! Rack temps
Yes! Turn down your thermostat! Even if your Zilla thermometer is off by its maximum amount, it's still at least 98.5 F in there!
Where do you have the probe for your Herpstat?
Re: Need help ASAP! Rack temps
Quote:
Originally Posted by
Eric Alan
Yes! Turn down your thermostat! Even if your Zilla thermometer is off by its maximum amount, it's still at least 98.5 F in there!
Where do you have the probe for your Herpstat?
I taped it directly to the flexwatt heat tape
Re: Need help ASAP! Rack temps
Okay I ran into this problem a couple of days ago. The most important temperature is what the floor of the tub temperature is. Your heat tape is going to be way hotter than the actual temperature of the floor of your tub. I have a herpstat 2 that is currently set at 107 to get a 92 degree hot spot on my tub; my heat tape is show hotter than that. I have received conflicting comments on whether to attach the probe of the herpstat to the heat tape or the bottom of the tub. I highly recommend purchasing a heat temperature gun.
Re: Need help ASAP! Rack temps
Quote:
Originally Posted by
fLako0aGuiiLaR
I taped it directly to the flexwatt heat tape
Did you put the tape on the probe itself or on the cord? What kind of tape did you use?
Re: Need help ASAP! Rack temps
I also run a herpstat. Turn the stat down a bit til you get a better thermometer. I use a temp gun and it works well. I have my probe under my heat tape. My temps run pretty true. I am very pleased with my herpstat. I have no issues with it and would recommend it to anyone.
Re: Need help ASAP! Rack temps
Quote:
Originally Posted by
Eric Alan
Did you put the tape on the probe itself or on the cord? What kind of tape did you use?
I put the tape on the probe itself i used black electrical tape
Re: Need help ASAP! Rack temps
Quote:
Originally Posted by
blk02ssmonte
I also run a herpstat. Turn the stat down a bit til you get a better thermometer. I use a temp gun and it works well. I have my probe under my heat tape. My temps run pretty true. I am very pleased with my herpstat. I have no issues with it and would recommend it to anyone.
Yeah i irder the accurite thermometer and the PE200 temp gun i didnt know which temp gun is best and i saw a lot of good comments on both the thermometer and the temp gun
Re: Need help ASAP! Rack temps
Quote:
Originally Posted by
fLako0aGuiiLaR
I put the tape on the probe itself i used black electrical tape
Electrical tape is fine, but I'd recommend moving the tape from the probe to the cord just below the probe. It's possible that the tape covering the probe is causing inaccuracies in the measurements it's taking.