Fogger dripping?

Is there possibly a way i can stop my fogger from dripping? I use aspen as substrate so the dripping may cause it to mould!?!?


Sent from my iPod touch using Tapatalk - now Free

Quote:

---

Originally Posted by dillymann

Is there possibly a way i can stop my fogger from dripping? I use aspen as substrate so the dripping may cause it to mould!?!?

---

What type of fogger is it?

If it is a reptifogger then perhaps it's the way you've got the tube setup. Condensation will buildup in the tub, so I ave found the best solution is to swap the tub that comes with the reptifogger with a smooth tube from your hardware store.

This is for a bp enclosure? My suggestion would be to try to see if you can raise humidity by changing aspen to cypress and adding a humid box so you can take out the fogger.

Quote:

---

Originally Posted by Rickys_Reptiles

What type of fogger is it?

If it is a reptifogger then perhaps it's the way you've got the tube setup. Condensation will buildup in the tub, so I ave found the best solution is to swap the tub that comes with the reptifogger with a smooth tube from your hardware store.

---

Its home made I used 1/2" PVC pipe for the tubes

http://img.tapatalk.com/d/13/10/22/una8yma6.jpg


Sent from my iPod touch using Tapatalk - now Free

Quote:

---

Originally Posted by anatess

This is for a bp enclosure? My suggestion would be to try to see if you can raise humidity by changing aspen to cypress and adding a humid box so you can take out the fogger.

---

I have heard bad things about cypress having bugs in it and I have a humid hide if anything I will switch aspen to coco husk


Sent from my iPod touch using Tapatalk - now Free

Maybe a good ol' fashion bowl(or dry sponge) to catch the drips under the tubes.
Maybe have your exit tubes go horizontal or even a slight upslope to prevent dripping. The water collection in them would probably just evaporate itself or you can just go in manually to towel it dry.

Quote:

---

Originally Posted by dillymann

Its home made I used 1/2" PVC pipe for the tubes

http://img.tapatalk.com/d/13/10/22/una8yma6.jpg


Sent from my iPod touch using Tapatalk - now Free

---

Your setup is the issue. The way you have created a horizonal tube is going to trap the moisture and cause it to condense. I would change it to something more like this:

http://i750.photobucket.com/albums/x...ps9e416ed0.png

You will still have some dripping, since moisture naturally goes up, not down, but it'll be better than what you have now.

I have a big water dish in there but its not doing a whole lot...


Sent from my iPod touch using Tapatalk - now Free

Place a wet rag along the top of the screen on your tank or up to the heat dome then get a plastic container cut a hole in it the top and place some sphagnum moss in it,wet it ,ring it out and keep it damp and that will help raise humidity. I'm actually about to up the temp in my tank and going to do the same. Wanna see if I can get my tank to he a steady 90 degrees and atlesst 50 % humidity. Cause now I'm at 86 degrees and 40-50 humidity on avg..that's before misting. I know if I raise temp it can dry out the tank,so have to get humidity up.

i am unfamiliar with this type of fogger, what physical process is used to create the fog? (i suspect its ultrasound but im not sure).

the ultrasound foggers i know are typically partially submerged and fed by a body of water where the water surface is only slightly above the fogger, so the water pressure is minimal. like 5 millimeters or 1/6 th of an inch of water.

i can help when i know more about the device and the physics behind it.

also, is it an overflow problem, or is the fog condensing and then dripping down?