New Thermostat Not Working...
So I bought a new ZooMed UTH and Zilla thermostat for the new enclosure. Placed the probe on the bottom underneath the tub and duct-taped the UTH over it like the tutorial instructed. I plugged the UTH into the thermostat outlet and the thermostat into the wall outlet. I turned on the thermostat and set it to 95 F. Checked a few hours later and the UTH wasn't even warm.
Did I skip something?
Re: New Thermostat Not Working...
Both lights are on, and I'd be pretty pissed off if it doesn't work. The thing cost 50 bucks...
- - - Updated - - -
Quote:
Originally Posted by
CatandDiallo
To be honest, I would ditch the cheap quality thermostat and get yourself a nice thermostat. You know, one that will actually work! As soon as I got my herpstat, I have no had one single worry about the temperatures in my enclosure.
It'll save you the time of fiddling around with crappy ones, and it'll give you peace of mind!
http://www.spyderrobotics.com/salepic_new.jpg
Cheap? It was $50! :C
The receipt was gone by the time I got home, and I can't but a new one until next month anyway or I won't be able to eat.
But I'll consider it.
Re: New Thermostat Not Working...
Quote:
Originally Posted by
The Serpent Merchant
Keep in mind that 95 degrees is lower than your body temperature so it won't feel more than warm.
That said the zilla thermostats are known to be low quality and it wouldn't surprise me if it isn't working properly.
Are both of the lights on?
So basically it's typical for the Zilla ones to make the UTH not work at all?
I also have a thermometer that -should- be accurate, placed on top of the UTH but inside the tub. It still reads room temp.
Re: New Thermostat Not Working...
Time to trouble shoot- plug the uth into the wall and plug a lamp into the t-stat...you could have a bad uth.
Re: New Thermostat Not Working...
Quote:
Originally Posted by
skinnyrascal
Both lights are on, and I'd be pretty pissed off if it doesn't work. The thing cost 50 bucks...
- - - Updated - - -
Cheap? It was $50! :C
The receipt was gone by the time I got home, and I can't but a new one until next month anyway or I won't be able to eat.
But I'll consider it.
I meant moreso cheap in quality, but $50 is cheap in comparison to the reputable thermostats.
Also, sometimes stores can pull up your receipts in their system and re-print them, if you lost yours. One of the stores that I used to work at did that.
Call them and let them know you lost it, and ask them if they could do that or if there are any other options available for you.
Re: New Thermostat Not Working...
Quote:
Originally Posted by
CatandDiallo
I meant moreso cheap in quality, but $50 is cheap in comparison to the reputable thermostats.
Also, sometimes stores can pull up your receipts in their system and re-print them, if you lost yours. One of the stores that I used to work at did that.
Call them and let them know you lost it, and ask them if they could do that or if there are any other options available for you.
Luckily it turns out I did keep the receipt! It was right by the tank she's currently in. I will take the UTH to PetCo tomorrow as I'm sure that's what was faulty. As for the thermostat, maybe it still works but if it's unreliable it may be better to get a good one. I can't afford anything much more expensive but I'll see what I can do...
- - - Updated - - -
Thanks for all your answers! I think the UTH is what really didn't work so I'll be returning it. I found the receipt. :D