Herpstat power matching function
Does anyone know how to adjust the power on a herpstat? My other herpstats I know fine but I got a basic one for my incubator and I'm having troubles with the settings. It says I can change from lo1-lo2-standard-HI1-HI2.
Re: Herpstat power matching function
Quote:
Originally Posted by
kitedemon
I have never used anything other than standard, Are you having temp swings? I would actully ask Dion at herpstat directly he always answers quickly.
Im not sure, its lowering power and staying about .5 degree F below what it is set at. Also the manual says that it can be beneficial to adjust the power matching function when using on an incubator to keep temps from swinging and it is taking a long time to heat up, almost 2 days. I was actually going to call him today but I forgot. Thanks
Re: Herpstat power matching function
Quote:
Originally Posted by
Domepiece
it is taking a long time to heat up, almost 2 days.
What size heat tape are you using? How big is the incubator? You may have to use more heat tape, or larger sized heat tape.
Re: Herpstat power matching function
Quote:
Originally Posted by
adamsky27
What size heat tape are you using? How big is the incubator? You may have to use more heat tape, or larger sized heat tape.
11 in flexwatt, I added another yesterday and that brought it up. Its a 120qt cooler
Re: Herpstat power matching function
Quote:
Originally Posted by
RichsBallPythons
Do you by chance have the probe plugged in wrong.
If not then id suggest a Faulty probe or heat tape. I used my herpstat right out of box on bator and was up to temps in 2 hours
Nope probe is working fine and plugged in right and heat tape is heating up and evenly distributed. I think maybe I didnt have enough heat tape. Now it is fine but I'd still like to adjust the power. Right now its on standard which allows the temp to drop .5 degrees before the power comes on again so the herpstat isnt constantly powering up and shutting off however I'm trying to get it to power up to exactly where it is set to.
Re: Herpstat power matching function
Quote:
Originally Posted by
kitedemon
I agree is the herpstat applying 100% power for two days? at that rate it may never heat up.
Or are you using a cheap thermometer and there is a difference between the herpstats probe and thermometer? Most thermometers (digital anyway) under the 200$ mark are not very accurate they usually are with in 2º of correct the herpstat is likely the best thermometer in its price range you will find.
Im using an indoor outdoor thermometer with a probe and a thermometer within the incubator as well. They are one degree off from eachother. I have the herpstat probe taped to the flexwatt, would you recommend that I remove the herpstat probe from the heat tape and place it in the center of the cooler and use it as the thermometer? and yes they are cheap thermometers, the herpstat is from spyder robotics though.
